Datasheet

GENERAL ACCESSORIES
61
Oscilloscope Probes & Carrying Cases
Model PR 37AR
Model PR-55
Active Differential Probe
Model PR-60
Allows safe and accurate floating measurements
with your standard analog or digital oscilloscope.
Switchable between x10 and x100 attenuation.
Unit includes black and red probes and protective
rubber jacket.
General Purpose Probes
This full line of probes increases the versatility of
your oscilloscope with both fixed attenuation and
switchable from 100 to 250 MHz. Each probe in-
cludes a full accessory kit with a sprung hook, re-
placement tip and BNC adapter. All models
compliant to IEC61010-031
S
Specifications PR-60
Bandwidth 25 MHz (-3 dB)
Attenuation Ratio x10/x100
Accuracy ±2%
Rise Time 14 ns
Input Impedance
4 MΩ/10 pF
each side to ground
Input Voltage
Max. Differential ±700 V (DC+Peak AC)
Max. Common Mode ±700 V (DC+Peak AC)
Output Voltage
Max. Amplitude ±7 V (into 2 kΩ load)
Offset (Typical) ≤±5 mV, -10˚to 40˚ C
Noise (Typical) 1.5 to 2 mV
Source Impedance
1 Ω @ 1 kHz
8 Ω @ 1 MHz
CMRR
50Hz 86 dB
20kHz 66 dB
200kHz 56 dB
Probes Sprung Hooks (B/R)
Length of Input Lines 18" (45 cm)
Operating Temperature 14˚ to 104˚F (-10˚ to 40˚C)
Power Requirements 4 x AA Cells
Certification IEC61010-1 CATIII
Specifications PR 33A PR 37 AG PR 37AR PR 150 PR 100A PR 2000 PR-55
Bandwidth (MHz) 15/90 6/150 6/150 25/150 250 150 50
Attenuation x1/x10 x1/x10/REF x1/x10/REF x1/x10 x100 x100 x1000
Input Impedance
R(MΩ)
1/10 1/10 1/10 1/10 100 50 100
C(pF) 46/16 100/15 100/15 45/12 6.5 5 1
Voltage
(VDC+ACmax)
600 600 600 300 1,200 2,000 10,000
Compensation (pF) 10..35 10..35 10..35 10..30 10..35 10..30 10..30
Cable Length 48" (1.2m) 48" (1.2m) 48" (1.2m) 48" (1.2m) 48" (1.2m) 48" (1.2m) 80" (2.0m)
Demodulator Probe
Model PR 32A
All purpose demodulator probe, usable with most
oscilloscopes. Features light weight design and
48" (1.2 m) coaxial cable.
Specifications PR 32 A
Bandwidth 100 kHz - 650 MHz
Accuracy ±3 dB
Voltage 200 V
HF Voltage 50 Veff
Actuating Voltage 250 mV
Input Capacitance 5 pF
Cable Length 48" (1.2 m)
Body Color Black
Description LC 33 LC 40 LC 210A LC24 LC 29B
For Models
Clamp-on DMM
312B, 313A, 316, 325,
330B, 350B, 367A, 369B
Function Generators
4010A, 4011A, 4012A
4017A, 4040A
Bench Top DMM 2831E
Oscilloscopes
2120B, 2121, 2125A, 2126A,
2190B, 2522B
Spectrum Analyzers 2630
Mini-Pro® DMM
2405A, 2407A, 2408
Component Testers
810C, 815, 875B, 878B,
885, 890B, 879B & 830B
Dimensions
5 x 1.75 x 10.5"
(127 x 44 x 267) mm
11 x 5.5 x 12"
(279 x 140 x 305) mm
15 x 7.5 x 17.5"
(381 x 191 x 445) mm
3.75 x 1.5 x 6.75"
(95 x 38 x 171) mm
4 x 2.5 x 8"
(102 x 64 x 203) mm
Weight 3.18 oz. (90g) 1.02 lbs. (470 g) 2.36 lbs. ( 1070 g) 1.27oz. (36 g) 2.47oz. (70 g)
Material
1000D Navy Cordura Laminate
to a 3/16" foam padding, trico backing
1000D Navy Cordura
400D nylon packcloth
inside to help it encompass
the 1/4" foam padding
1000D Navy Cordura Laminate
Laminate to a 3/16" foam padding, trico backing
LC 210A
Carrying Cases
Model PR 32A