Datasheet

4
Avoid making measurements under humidity,
dampness or other environmental conditions that might
affect safety.
Turn the high voltage source off before connecting or
disconnecting the probe whenever possible.
The probe body should be kept clean and free of any
conductive contamination.
Do not remove the probe casing. Removal of the
probe’s casing may expose you to electric shock.
Keep fingers behind the probe’s finger guard during
use.
Always properly ground the probe with the lead before
contacting high voltage circuits with the probe tip. Always
disconnect the probe tip from high voltage circuits before
disconnecting the ground lead. Do not connect the probe
ground lead to any point which is at a potential other than
earth ground.
Use only on test instruments where the chassis or
return lead is properly grounded.
Use only in office-type indoor setting
The instrument is designed to be used in office-type
indoor environments. Do not operate the instrument:
• In the presence of noxious, corrosive, or
flammable fumes, gases, vapors, chemicals, or
finely-divided particulates.
• In environments where there is a danger of any
liquid being spilled on the instrument.
• In air temperatures exceeding the specified
operating temperatures.