User Manual

84
[:NUMber] <NR1 | ?>
Set or return step number
:ACTion <OFF/0, ON/1,
NAC/2, END/3
| ?>
Set or return step n action state
:CURRent <NRf | ?>
Set or return step n current value
:ONTime <NRf | ?>
Set or return step n time value
:VOLTage <NRf | ?>
Set or return step n voltage value
:TOTAl?
Return program total n step numbers
PROTection
Protection subsystem
[:STATe] ?
Return the protected state, 0=no
protection happened, 1=OVP, 2=OCP,
3=OPP, 4=CV to CC and 5=CC to CV
:CCCV <Bool | ?>
Set or return CC to CV protection
switch
:CLEar
Reset latched protection
:CVCC <Bool | ?>
Set or return CV to CC protection
switch
:OCP
[:STATe] <Bool | ?>
Set or return over-current protection
switch
:LEVel <NRf | ?>
Set or return over-current protection
level
:OPP
[:STATe] <Bool | ?>
Set or return over-power protection
switch
:LEVel <NRf | ?>
Set or return over-power protection
level
:OVP
[:STATe] <Bool | ?>
Set or return over-voltage protection
switch
:LEVel <NRf | ?>
Set or return over-voltage protection