User Manual

65
8. Press to select NEXT PROG parameter and use the rotary
knob to select a value of NONE or a value of 1-9. As described
previously, the user has the ability to queue another program
once the current program is finished. By default, NONE is placed
as the parameter value.
9. Press to complete the program configuration.
10. Make sure the program is turned ON and press to exit the
program settings.
11. Once the output state is enabled, by pressing , the program
will automatically execute. The following will be displayed when
the program is executing:
When program mode is running, an * indicator on the display will flash
to indicate the program is running. The current program (PRG: p), step
(S: sss) and repeat number (R: xx / yy) will also show on the display.
Where p is the program number, sss is the step number, xx is the
present repeated number and yy is the total repeat number. For
example, if the xx is 01 and yy is 03, this means that there are three
repeats of this program and it is now running the first repeat.
3.9 Timer Function
The timer function is a countdown clock, which allows the user to setup
how long the output will be enabled when it is initially turned ON.