User Manual

74
assistance.
LAN (Ethernet)
The LAN interface supports Telnet connection and Socket connection. It
also can be used to connect with the built-in web server GUI.
Follow the instructions below to select Ethernet interface for remote
operation.
1. From the SYSTEM menu, select Communication and press .
2. Press button once until LAN is blinking and press to
configure the settings for LAN remote communication. The
following display will be shown:
3. Use keys to select between each settings and press
to configure the corresponding setting.
4. To change any of the parameter settings, use the rotary dial.
5. Press to save each setting and the display will return to the
LAN menu.
6. The following lists the options that can be changed for each
setting:
Mode: Web, Tel, Socket
IP Addr: 000.000.000.000
Gway: 000.000.000.000
Mask: 000.000.000.000