User manual

8. To exit the menu at any time, press twice.

3.2 Configure Voltage/Current Output

Voltage and current can be set from the front panel. Remote sense is

also available on the rear panel for voltage compensation at the output.

Setting Voltage

Follow the steps below to set the output voltage:

1. From the normal front panel display, users can use either the

voltage adjust knob or the numeric keypad to enter the setting

voltage.

2. If entering using numeric keypad, press first so that the

cursor selects the voltage display. Then, enter the value and

press to set the voltage.

3. To change the cursor position to adjust with the voltage adjust

knob, use the keys to move left or right.

Note: To see the changes to the setting voltage, be sure the

display is not showing the measured voltage. This can be

checked by looking at the LED next to the button. If it

is not lit, the display is showing the setting voltage.

When output is ON, the user can use the rotary to adjust the voltage

value when the output is in constant voltage (CV) mode. The output

value will change simultaneously with the adjusted value. This is so

called on-the-fly function that allows user to easily change the output