User manual

value if the test is needed.

Setting Current

Follow the steps below to set the output current:

1. From the normal front panel display, users can use either the

current adjust knob or the numeric keypad to enter the setting

current.

2. If entering using numeric keypad, press first so that the

cursor selects the current display. Then, enter the value and

press to set the current.

3. To change the cursor position to adjust with the voltage adjust

knob, use the keys to move left or right.

Note: To see the changes to the setting current, be sure the

display is not showing the measured current. This can be

checked by looking at the LED next to the button. If it

is not lit, the display is showing setting current.

When output is ON, the user can use the rotary to adjust the current

value when the output is in constant current (CC) mode. The output

value will change simultaneously with the adjusted value. This is so

called on-the-fly function that allows user to easily change the output

value if the test is needed.