User manual

2. Press button three times until EXTCTRL is blinking and

press .

3. Press button one time to select VOLTAGE and press .

4. Use the rotary knob to select EXT-V (external voltage) or EXT-R

(external resistance) option and press . To have front panel

control, select FRONT.

5. Use the keys to select PROG RNG (program range)

and press .

6. Now use the rotary knob to select between 10V/10K or 5V/5K

and press .

7. Press several times to exit the menu setting.

Voltage Mode

Under voltage mode, the user may control the full scale output voltage

value through Pin 9, by inputting a voltage level of 0-5 V (0-5 V / 0-5 kΩ

mode) or 0-10 V (0-10 V / 0-10 kΩ mode) as shown below.

Figure 3.4 – Analog Voltage Programming Diagram (Voltage Mode)

Resistor Mode

Under resistor mode, the user may control the full scale voltage output

0 – 5 V

0 – 10 V