User manual

6. Now use the rotary knob to select between 10V/10K or 5V/5K

and press .

7. Press several times to exit the menu setting.

Voltage Mode

Under voltage mode, the user may control the full scale current output

value through Pin 10, by inputting a voltage level of 0-5V (0-5 V / 0-5 kΩ

mode) or 0-10V (0-10 V / 0-10 kΩ mode) as shown below.

Figure 3.6 - Analog Current Programming Diagram (Voltage Mode)

Resistor Mode

Under resistor mode, the user may control the full scale current output

value by connecting a resistance value of 0-5 kΩ (0-5 V / 0-5 kΩ mode)

or 0-10 kΩ (0-10 V / 0-10 kΩ mode) between Pin 10 and Pin 23 as

shown below.

Figure 3.7 - Analog Current Programming Diagram (Resistor Mode)

0 – 5 kΩ

0 – 10 kΩ

0 – 5V

0 – 10V