User manual

7. At this point, the user may select how many times they wish the

current program to repeat in the REPEAT field, by using the

keypad or the rotary knob.

8. Press to select NEXT PROG parameter and use the rotary

knob to select a value of NONE or a value of 1-9. As described

previously, the user has the ability to queue another program

once the current program is finished. By default, NONE is placed

as the parameter value.

9. Press to complete the program configuration.

10. Make sure the program is turned ON and press to exit the

program settings.

11. Once the output state is enabled, by pressing , the program

will automatically execute. The following will be displayed when

the program is executing:

When program mode is running, an * indicator on the display will flash

to indicate the program is running. The current program (PRG: p), step

(S: sss) and repeat number (R: xx / yy) will also show on the display.

Where p is the program number, sss is the step number, xx is the

present repeated number and yy is the total repeat number. For