User manual

5. Press to save each setting and the display will return to the

LAN menu.

6. The following lists the options that can be changed for each

setting:

Mode: Web, Tel, Socket

IP Addr: 000.000.000.000

Gway: 000.000.000.000

Mask: 000.000.000.000

Web server

There is an embedded web server GUI that can access the power supply

via LAN interface using a web browser. The GUI provides a simple way of

setting voltage and current, as well as monitoring the output, using a

web browser from a computer connected to the same local area

network as the power supply. To access this, do the following:

1. Connect the power supply to the same network as the PC.

2. Open a web browser on the computer to control the power

supply.

3. Check the IP address of the power supply through INFO in the

MENU.

4. Type the IP address of the power supply in the URL bar of your

browser with http:// prefix (i.e. http://192.168.1.55 for IP

Address 192.168.1.55).

5. If correctly configured, the following screen will be shown: