User manual

79
clear all errors/events from the memory, the “*CLS” command can be
used.
The following table lists all the known errors that can be encountered.
Error
Description
-000
No error
-102
Syntax error
-103
Invalid separator
-108
Parameter not allowed
-109
Missing Parameter
-113
Undefined header
-131
Invalid suffix
-138
Suffix not allowed
-200
Execution error
4.4 SCPI Common Commands
The power supply is compatible with all IEEE-488.2 and SCPI commands.
Common commands generally control overall power supply functions
such as reset, status, and synchronization. All common commands
consist of a three-letter mnemonic preceded by an asterisk (*).
Commands ended with question mark (?) represent a query command.
The following table lists the common SCPI commands supported:
Command
Description
*CLS
Clear status
*IDN?
Return the instrument identification
(<Manufacturer>,
<model>, <serial number>, <firmware type and version>)