Datasheet

S
weep Characteristics
Waveforms sine, square, ramp, arbitrary (except DC)
Sweep Shape linear or logarithmic, up or down
Sweep Time 1 ms 500 s ± 0.1%
Sweep Trigger internal, external, manual
I
nputs and Outputs
Output Impedance 50 Ω, high impedance
Sync Out
TTL compatible
> 50 ns width, not adjustable
50 Ω (typical) output impedance
10 MHz max. frequency
Modulation In
± 5 V for 100% modulation
> 10 kΩ input impedance
max. voltage input: + 5 V
External Clock In
Frequency Range: 10 MHz ±1 kHz
Min. Voltage Input: 2.3 V
External Clock Out
Frequency: 10 MHz
Voltage Level: >1 Vpp
Ext Trig/Gate/FSK/Burst
TTL compatible
max. voltage input: + 5 V
Frequency Counter
Measurement
frequency, period, positive/negative pulse width,
duty cycle
Measurement Range 100 mHz 200 MHz
Frequency Resolution 6 bits
Voltage Range (non-modulated signal)
DC Coupling
DC offset range: ± 1.5 VDC
100 mHz 100 MHz, 50 mVrms - ± 2.5 V
100 MHz 200 MHz, 100 mVrms - ± 2.5 V
AC Coupling 1 Hz 200 MHz, 100 mVrms – 5 Vpp
Pulse Width/Duty Cycle
Voltage Range
50 mVrms 5 Vpp
Input Impedance 1 MΩ
Coupling AC, DC
Trigger Level Range -3 V to +1.8 V
Environmental and Safety
Temperature
operating: 32 ºF 104 ºF (0 °C 40 °C)
storage: -4 ºF 140 ºF (-20 °C 60 °C)
Humidity
< 95º F (< 35 °C), 90 % RH
95 ºF 104 ºF (35 °C – 40 °C), 60 % RH
Altitude
operating: below 9,842 ft (3,000 m)
storage: below 49,212 ft (15,000 m)
Electromagnetic
Compatibility
EMC Directive 2004/108/EC, EN61326:2006,
EN61000-3-2:2006+A2:2009, EN61000-3-3:2008
Safety
low voltage directive 2006/95/EC, EN61010-1:2001,
EN61010-031:2002+A1:2008
General
Display 4.3” TFT-LCD display, 480 x 272
Interfaces USBTMC (standard), GPIB (optional), USB host port
Storage Memory 10 instrument settings, 32 arbitrary waveforms
AC Input 100 – 240 VAC ± 10%, 50 / 60 Hz ± 5%
100 – 120 VAC ± 10%, 45 440 Hz
Power Consumption 30 W max.
Dimensions (W x H x D) 10.3” x 4.1” x 13.5” (261 x 105 x 344 mm)
Weight 6.1 lbs (2.8 kg)
Three-Year Warranty
Standard Accessories
Getting started manual, full instruction manual on CD,
AC power cord, USB type A-to-type B cable, certificate
of calibration
Optional Accessories USB-to-GPIB adapter (model AK40G)
v050515
5 www.bkprecision.com
Dual Channel Function/Arbitrary Waveform Generators
4060 Series
Model 4063, 4064 & 4065
P
ulse
Pulse Width 12 ns minimum, 100 ps resolution, 1,000,000 s max
Rise/Fall Time 6ns – 6s
(1)
, 100 ps resolution
Duty Cycle Range 0.0001 % to 99.9999 %
Overshoot < 3%
Jitter (pk-pk) < 100 ps rms (typical)
Burst
Waveform sine, square, ramp, pulse, arbitrary (except DC)
Type cycle (1 1,000,000 cycles), infinite, gated
Start/Stop Phase 0 ° 360 °
Internal Period 1 µs 1000 s ± 1%
Gated Source external trigger
Trigger Source internal, external, manual
P
hase Offset
Range -360 ° 360 °
Resolution 0.1 °
T
rigger Characteristics
Trigger Input
Input Level TTL compatible
Slope rising or falling, selectable
Pulse Width > 50 ns
Input Impedance > 5 kΩ, DC coupling
Maximum Frequency 1 MHz
Input Latency < 380 ns
Trigger Output
Voltage Level TTL compatible
Pulse Width > 60 ns (typical)
Output Impedance 50 Ω (typical)
Maximum Frequency 1 MHz
AM, FM & PM Modulation Characteristics
Carrier sine, square, ramp, arbitrary (except DC)
Source internal, external
Modulation Waveform sine, square, ramp, noise, arbitrary (1 mHz 50 kHz)
AM Modulation Depth 0% - 120%, 0.1% resolution
FM Frequency Deviation 0 – 0.5 x bandwidth, 1 mHz resolution
PM Phase Deviation 0 – 360 °, 0.1 ° resolution
ASK & FSK Modulation Characteristics
Carrier sine, square, ramp, arbitrary (except DC)
Source internal, external
Modulation Waveform 50% duty cycle square waveform (1 mHz – 1 MHz)
DSB-AM Modulation Characteristics
Carrier sine, square, ramp, arbitrary (except DC)
Source internal, external
Modulation Waveform sine, square, ramp, noise, arbitrary (1 mHz 50 kHz)
PWM Modulation Characteristics
Source internal, external
Modulation Waveform sine, square, ramp, arbitrary (except DC)
External Modulation - 5 V to + 5 V (max. width deviation)
Duty Cycle
Modulating Frequency
1 mHz 50 kHz
(1) depending on pulse width