Operating instructions

OI: BK MIKRO LIN.B General Notice
Rev. 2.02 dated 31.5.2007 - I -
General Notice
Safety guidelines
These operating instructions contain notices which you should observe to ensure your own
personal safety, as well as to protect the product and connected equipment. These notices
are highlighted in the manual by a warning triangle and are marked as follows according to
the level of danger:
Danger
Immediate danger
to life and limb of personnel and others.
Non-compliance may cause death or
serious (crippling) injury.
Warning
Hazardous situation
to life and limb of personnel and others.
Non-compliance may cause death or
serious injury.
Caution
Potentially hazardous situation
Non-compliance may cause slight injury;
possible damage to property.
Notes on correct handling
Non-compliance may cause damage to the product
and/or damage to parts/items in the vicinity.
Environmental protection
Non-compliance may have an impact on the environment.
Intended use
Warning
BK MIKRO is a control system suitable for tool as well as for object and free space
monitoring applications. It may only be used for the applications described in the
technical documents, and only in connection with devices or components from
other manufacturers which have been approved or recommended by us.
This product can only function correctly and safely if it is transported, stored,
set up, and installed correctly, and operated and maintained as recommended.