Operating instructions

OI: BK MIKRO 7 System Components
Rev. 2.01 dated 05.02.2007 Page 13 of 32
2.2.2 Technical data
Housing Anodized aluminum
Protection type IP 67
Wand length 165 mm (standard), exchangeable wand
Scanning angle
– TK7A
– TK7RL
270° max. (scanner with mechanical backstop)
360° max. (scanner without mechanical backstop)
Control unit connection Small circular connector, M12x1, 8 pin
Ambient temperature 0 ºC to +80 ºC
Storage temperature –25 ºC to +85 ºC
Scanning cycles > 5 million at minimum scanning intensity
Fig. 2-8: Scanner
Note:
To prevent injury, your wand will be supplied complete with a protective cap.
2.2.3 How to change
After undoing hollow screw (M3), the wand can easily be removed from its holder.
Insert new wand into holder and tighten.
BK
BK
BK
BK
RO
RO
RO
RO
ø1.2
59
ø20
26.5
9.5
42.5
circ. 150
General tolerances
ISO 2768
– mK
Protective cap
Connection cable
straight connector at the scanner end, 8 pin
connector at the control unit end, 6 pin
max. 98
max. 114
Connection cable
connector at the control unit end, 6 pin
Connector
angled, 8 pin
Housing
Wand holder
Scanning wand
standard length 165 mm