B&K AV7.
Table Of Contents Page Introduction Battery Installation 2 A. How To Open and Close Battery Compartment Cover B. Low Battery Message Using Your Remote Control A. Function Table Reference Function Tables B. Preprogrammed Set-Up Three Digit Code Method Auto Search Method Recalling the Set-Up Code C.
Introduction The B&K AV7.1 remote control is preprogrammed to operate over 1,000 Audio and Video components so that you can set it up by simply punching in a threedigit code number that matches your equipment. The AV7.1 also has the ability to learn new functions from your original remote controls, allowing you to customize the remote to your own needs and update it as you add new equipment. Please refer to pages 8 – 16 for instructions on setting up the remote control. AV7.
Using Your Remote This remote control uses four (4) AAA 1.5V batteries. Please be sure to match the batteries with the (+) and (-) markings inside the battery compartment during the installation. A. Open and Close the Battery Compartment Cover 1. To open the battery cover, push the latch forward toward the top of the remote control, and lift the latch up. 2. To close the battery cover, slide the battery cover straight in (towards the top of the remote) and push down until it “clicks” into place. B.
Using Your Remote A.
Using Your Remote No. 1-8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25-29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Button Name Device Name Power / On Mute Off VOLUME + VOLUME – CHANNEL + CHANNEL – Up / Pause Down / Stop Right / F.F. Left / Rew. Sel / Play Save / I<< / Mode Menu / >>I Exit / Rec.
Using Your Remote No. 1-8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25-29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Button Name Device Name Power / On Mute Off VOLUME + VOLUME – CHANNEL + CHANNEL – Up / Pause Down / Stop Right / F.F. Left / Rew. Sel / Play Save / I<< / Mode Menu / >>I Exit / Rec.
Using Your Remote No. 1-8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25-29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Button Name Device Name Power / On Mute Off VOLUME + VOLUME – CHANNEL + CHANNEL – Up / Pause Down / Stop Right / F.F. Left / Rew. Sel / Play Save / I<< / Mode Menu / >>I Exit / Rec.
Using Your Remote B. Preprogrammed Set-Up The AV7.1 universal remote control can operate up to eight separate audio and video devices or equipment. To program the remote control for your devices, please use the following steps. Three Digit Code Method 1. 2. Turn on the device you would like the remote control to operate, either manually or with your original remote control. Find the three digit Set-Up Code Number for your device from the tables on pages 32 – 49.
Using Your Remote Note: SET appears in the LCD for 20 seconds to indicate that the remote control is ready to be programmed. The following steps must be entered while SET appears in the LCD. 4. Point the remote control toward the device that was turned on in Step 1 and enter in the first three-digit Set-Up Code number for that device using the number buttons (0-9) on the remote control. SET followed by the three-digit number will appear in the LCD.
Using Your Remote Auto Search Method Please use this method if none of the Set-Up Code numbers worked for your device during the standard set-up procedure or if the manufacturer or brand for your device was no listed in the Set-Up Code Tables. 1. Turn on the device you would like the remote control to operate, either manually or with your original remote control. 2. Press the corresponding Device Button (B&K, CD, DVD, TAPE, SAT, TV, V1, or V2) and the MUTE button, simultaneously.
Using Your Remote 4. Once the correct code is confirmed, press the Device Button to store the Set-Up Code number. PASS will appear in the LCD. 5. Test the remote control for your device. Try the POWER, CHANNEL UP AND DOWN, VOLUME UP AND DOWN buttons, etc. If any of the buttons do not perform as they should, please repeat the set-up from Step 1 using the next Set-Up Code number for your device. Note: Some audio and video devices have separate buttons for POWER ON and POWER OFF.
Using Your Remote C. Learning Set-Up The AV7.1 has the ability to learn new functions from your original remote controls: • There are 8 pages of learning with each page corresponding to the 8 Device modes on the remote control: B&K, CD, DVD, TAPE, SAT, TV, V1, or V2. • All Buttons in all Device modes can learn, except the LIGHT button. • The 8 Device buttons at the top of the remote control labeled B&K, CD, DVD, TAPE, SAT, TV, V1, or V2, can learn only in the Audio Mode (B&K).
Using Your Remote 3. Press and hold both the Device Button selected in Step 1 and the SEL / PLAY button for approximately three seconds, until the LCD on the AV7.1 shows LEARN. The AV7.1 is now in the learning mode. 4. Press and release a button on the AV7.1 you have selected to learn the new function. The LCD will show READY. Press and hold the button on the original remote control for approximately 3 seconds from which you are learning the new function. The LCD on the AV7.
Using Your Remote Once you have stored the learned functions, test the buttons that have been taught. If any of the buttons do not operate as they should, please repeat from Step 1 for those buttons. Note: If the LCD shows FAIL at any time during the learning process, the AV7.1 was unable to learn the new functions. Please repeat from Step 4. If the AV7.
Using Your Remote 4. 5. 6. Press and hold the button on the original remote control that you wish to teach into the AV7.1, for approximately three seconds. The LCD on the AV7.1 will show - - - - - indicating that it is receiving information from the original remote control. Release the button on the original remote control. The LCD on the AV7.1 will show RETRY. Press and hold the same button on the original remote again, for approximately three seconds. The LCD on the AV7.
Using Your Remote Erasing All Functions in One Device Mode 1. 2. 3. Press the Device button for the mode to be erased. Press and hold the Device and SEL / PLAY buttons simultaneously, for approximately three seconds, until the LCD shows LEARN. Press and hold the Device and LIGHT buttons simultaneously, for approximately five seconds and then release the buttons. The LCD will flash ERASE and then alternately CLEAR and the Device Mode. Note: This procedure takes about two minutes to complete.
Using Your Remote D. Operation After you have programmed the remote control for your equipment, use the following procedures to operate your home entertainment system: 1. 2. 3. Press the Device Button that you wish to operate: i.e. to operate a TV, press the TV device button: to operate a VCR, press the V1 Device Button, etc. Aim the remote control at the device and press the POWER button to turn the device on. Press the buttons that send out the commands you desire.
Using Your Remote Main Device Mode When the main Device Mode is displayed in the LCD, the AV7.1 will operate in a standard operating mode and all the buttons will operate the preprogrammed, learned and punch through features for that Device Mode. Automatic Audio Mode The AV7.1 is designed to provide convenient and continuous operation of your home theater system’s A/V Receiver / Preamplifier.
Using Your Remote Device Buttons Volume Buttons Surround Controls Macro Buttons Light Button Backlighting All the buttons and the LCD on the AV7.1 are backlit for eight seconds when the LIGHT button is pressed. The backlight is extended an additional eight seconds with any button press while the backlight is on.
Advanced Features After you set-up the remote control to operate your equipment, you can also program advanced features on the remote control. The advanced features are designed to enhance the use of the remote control with your home entertainment system. A. Punch Through Volume Control “Punch Through” You can program the remote control so that either the AUDIO or TV Volume Control (VOLUME UP, DOWN, and MUTE) will also operate in other modes on the remote control.
Advanced Features Channel Control “Punch Through” You can program so that either the SAT or V2 Channel Controls (CHANNEL UP and DOWN) will also operate in other modes on the remote control. Example: Change CHANNEL UP and DOWN on your satellite while the remote is in the TV mode. Note: When this feature is active, SAT or V2 CHANNEL UP and DOWN will override any existing channel controls in that mode. To Set-Up 1. 2. 3. 4. Select the mode that you wish to program for Channel Control “Punch Through.
Advanced Features Transport Control “Punch Through” You can set-up your remote control so that V1 or CD Transport Controls (PLAY, STOP, FAST FORWARD, REWIND, PAUSE, and RECORD) will also operate in other modes on the remote. Example: Control V1 functions while operating the remote control in the TV mode. Note: When this feature is active, the V1 or CD functions (PLAY, STOP, FAST FORWARD, REWIND, and RECORD) will override any existing functions preassigned to these buttons in that mode. To Set-Up 1. 2. 3.
Advanced Features Macro Buttons The buttons labeled M1, M2, M3, M4, and POWER can be used as macro buttons. Each of these macro buttons can send out up to 15 commands with the press of one button. Macro buttons can be used to turn on and off multiple components with one button or to directly access favorite channels. The POWER button can operate as a POWER command for a single device or as a macro button that can send out multiple commands to multiple devices.
• Advanced Features “Relocating” Functions Macro Buttons can be programmed to store functions from one mode and transfer them into other modes. Example: In the B&K mode, Macro Buttons can store various functions from the TV, V1, and Satellite modes. Programming Macro Buttons 1. 2. 3. Select the mode that you wish to program the Macro Button in by pressing the corresponding Device Button (B&K, CD, DVD, TAPE, SAT, TV, V1, or V2) and MUTE button, simultaneously. SET will appear in the LCD.
Advanced Features Example – Memory Button Programming To program Macro Button M2 in the B&K mode to send the following commands: turn on the Audio Receiver, turn on the TV, turn on a VCR, and turn on a Satellite Receiver. 1. 2. 3. 4. Press the B&K Device and the MUTE button, simultaneously. SET will appear in the LCD. Press Macro Button M2. M2__# # will appear in the LCD. Press the MUTE button (to turn on the Audio Receiver) M2__01 will appear in the LCD.
Advanced Features C. Changing the LCD Display Twenty-five different LCD displays can be selected for each Device Mode of the remote control. To select an alternate LCD display, please use the following procedure: 1. Press and hold the Device Button for which you would like to change the LCD setting. 2. While pressing the Device Button, press and release the MENU button. Each time the MENU button is pressed, the LCD will show one of twenty-five displays. 3.
Advanced Features D. Programming a Second TV, VCR, etc. to Other Device Buttons. This feature is used to program the remote control for two or more TVs, VCRs, etc. or to program a device into a mode with a different Device Button name. You can store the three-digit Set-Up Code number for any device into any other unused Device Button. Example: If your home entertainment system contains two VCRs. First, using the V1 Device button, program the remote via standard set-up to operate the first VCR.
Warranty The AV7.1 System Controller comes with a One-year warranty from the date of purchase. Specifications Model B&K AV7.1, infrared remote control Power Four 1.5V AAA Batteries Dimensions (h/w/d) 7.88 x 2.5 x 1.25 inches Weight 6.5 oz.
Glossary Cursor Control Buttons that correspond to the UP, DOWN, LEFT, RIGHT, SELECT, GUIDE, MENU, and EXIT functions of your audio / video equipment. Device Audio or video equipment, i.e. Television, VCR, Cable box, Audio receiver, Satellite receiver, etc. Device Button Any of the eight buttons located at the top of the remote control labeled B&K, CD, DVD, TAPE, SAT, TV, V1, and V2. Device Buttons are used to select modes of operation and to program the remote control.
Glossary Set-Up Code The three-digit number that is used to program the remote control for your particular manufacturer or brand of audio / video equipment. Set-Up Code numbers are located in the table in the appendix, on pages 32 – 49 of the instruction manual. Set-Up Code numbers are categorized by type of device, i.e. Audio, Satellite, TV, V1, V2, CD, DVD, and Tape. More than one Set-Up Code number may work with your device.
Appendix Assignment of Audio / Video Equipment Please use the following listing to locate the correct Set-Up Code Tables for your equipment.
Set-Up Code Tables Audio Manufacturer / Brand ADCOM AIWA AKAI AMC ANGSTROM ARCAM AUDIO ACCESS AUDIO ALCHEMY AUDIO DESIGN AUDIO EASE AUDIO MATRIX AUDIOFILE AUDIO TECHNICA B&K BOSE BRYSTON CARVER CASIO CHIRO CINEMA SOUND CITATION CLARION CURTIS MATHES DENON ELAN ENLIGHTENED AUDIO FISHER FOSGATE GENERAL ELECTRIC HARMAN KARDON HITACHI JC PENNY JENSEN JVC KENWOOD KRELL LEXICON LINN LUXMAN LXI Set-Up Code Number 082 092 161 225 018 104 170 188 202 203 211 213 138 189 125 126 127 128 142 141 147 135 194 221 021 1
Set-Up Code Tables Audio Manufacturer / Brand MAGNAVOX MARANTZ MCINTOSH MCS MERIDIAN MITSUBISHI MONDIAL NAD NAKAMICHI NEC ONKYO OPTIMUS PANASONIC PARASOUND PHILIPS PIONEER PROCEED RCA REALISTIC ROTEL SANSUI SANYO SCOTT SEARS SHARP SHERWOOD SONY SOUNDESIGN SOUNDSTREAM SSI SUMO TEAC TECHNICS THETA DIGITAL TOSHIBA WARDS YAMAHA ZENITH Set-Up Code Number 086 152 164 208 028 031 040 063 185 186 251 238 076 079 100 021 204 242 243 042 043 112 157 158 113 186 111 172 183 244 245 176 017 046 064 079 080 090 107 108
Set-Up Code Tables Satellite Manufacturer / Brand BIRDVIEW B&K CHANNEL MASTER CHAPARRAL CITOH DRAKE DX ANTENNA ECHOSTAR EUROSAT FUJITSU GENERAL ELECTRIC GENERAL INSTRUMENT HITACHI HOME CABLE HOUSTON TRACKER IRC LEGEND LUXOR MACOM MEMOREX NEXTWAVE PACE PANASONIC PANSAT PERSONAL CABLE PHILIPS PL PRESIDENT PRIMESTAR PROSCAN RCA Set-Up Code Number 129 001 002* 013 014 015 018 036 055 008 009 012 077 054 005 006 007 010 011 112 116 141 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 114 017
Set-Up Code Tables Satellite Manufacturer / Brand REALISTIC SAMSUNG SATELLITE SERVICE SONY SUPERGUIDE TEE COM TOSHIBA TOWN & COUNTRY UNIDEN US ELECTRONICS ZENITH Set-Up Code Number 043 074 123 028 035 047 085 103 020 023 026 075 087 088 090 107 130 137 127 023 026 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 023 081 082 083 084 091 120 * For Future Applications 35
Set-Up Code Tables TV Manufacturer / Brand 3M AIWA ARCHER B&K CARVER DENON DMX EXTRON FISHER GOLDSTAR HARMAN KARDON JVC KENWOOD LINN LUTRON LUXMAN MAGNAVOX MAKITA MARANTZ MCINTOSH NAD NAKAMICHI NILES NSM ONKYO OPTIMUS PANASONIC PHILIPS PIONEER POLK AUDIO QUASAR S/A SANSUI SHARP SHERWOOD SONY TEAC TECHNICS TOSHIBA Set-Up Code Number 152 015 071 100 114 155 001 002 003* 006 008 024 027 105 227 229 156 151 064 011 233 106 116 185 239 240 005 013 023 026 064 145 146 181 190 124 158 159 035 137 139 027 186 014
Set-Up Code Tables TV Manufacturer / Brand JCPENNY JENSEN JVC KEC KENWOOD KLOSS KMC KTV LODGENET LOGIK LUXMAN LXI MAGNAVOX MARANTZ MATSUI MEMOREX METZ MGA MINERVA MITSUBISHI MTC NAD NEC NIKEI ONKING ONWA OPTONICA PANASONIC PHILCO PHILIPS PIONEER PORTLAND PROSCAN PROTON QUASAR RADIO SHACK RCA REALISTIC ROTEC RUNCO SAMPO Set-Up Code Number 004 008 009 024 030 065 101 143 156 160 201 013 034 038 070 083 145 043 070 201 059 143 043 143 154 201 072 072 004 007 015 052 081 160 164 166 004 022 59 060 061 063 064
Set-Up Code Tables TV Manufacturer / Brand SAMSUNG SANYO SCOTT SEARS SHARP SIEMENS SIGNATURE SONY SOUNDESIGN SPECTRICON SSS SYLVANIA TANDY TATUNG TECHNICS TECHWOOD TEKNIKA TELEFUNKEN TELERENT TERA TMK TOSHIBA TOTEVISION UNIVERSAL VIDEO CONCEPTS VIDIKRON VIDTECH WARDS YAMAHA YORK YUPITERU ZENITH ZONDA Set-Up Code Number 004 050 089 101 105 127 143 160 007 020 053 057 082 166 004 028 043 048 143 004 007 015 028 030 057 082 094 143 160 165 004 014 19 022 028 029 081 143 170 175 088 072 070 085 126 139 147 185
Set-Up Code Tables V1 Manufacturer / Brand AIWA AKAI AMPRO ANAM AUDIO DYNAMICS B&K BROOKSONIC CANON CAPEHEART CRAIG CURTIS MATHES DAEWOO DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GENERAL ELECTRIC HARMAN KARDON JCL JCPENNY JENSEN JVC KENWOOD LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA Set-Up Code Number 034 016 043 046 124 125 142 146 072 031 012 023 039 043 001* 035 037 129 028 031 108 003 040 135 031 041 005 007 010 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053
Set-Up Code Tables V1 Manufacturer / Brand MINOLTA MITSUBISHI MTC MULTITCH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RADIO SHACK RCA REALISTIC RICO RUNCO SALORA SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHINTOM SIGNATURE SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA Set-Up Code Number 013 020 013 020 045 046 051 059 061 142 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 083 133 140 145 013 020 031 063 031 034 067
Set-Up Code Tables V1 Manufacturer / Brand THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH Set-Up Code Number 034 006 008 013 042 047 059 079 082 112 131 040 101 040 012 048 012 034 046 141 040 003 013 017 024 031 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 * For Future Applications 41
Set-Up Code Tables V2 Manufacturer / Brand ABC AMERICAST ANTRONIX ARCHER B&K CENTURION CENTURY CITIZEN COMBANO EAGLE EASTERN ELECTRICORD GENERAL ELECTRIC GEMINI GENERAL INSTRUMENT HAMLIN HITACHI JERROLD M-NET MAGNAVOX MEMOREX MOVIE TIME NSC OAK PANASONIC PARAGON PHILIPS PIONEER PRUCER PTS PULSAR RCA RECOTON REGAL REGENCY SCIENTIFIC ATLANTA SIGNATURE SONY SPRUCER STARCOM STARGATE Set-Up Code Number 003 004 039 042 046 053 201 099 014 005 007 014 001* 092 007 007 080 081 020 040 057 066 032 072 008 054 074 2
Set-Up Code Tables V2 Manufacturer / Brand TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH Set-Up Code Number 039 040 056 052 007 014 004 053 005 007 014 032 035 012 015 018 086 087 088 089 052 060 093 * For Future Applications 43
Set-Up Code Tables CD Manufacturer / Brand ADCOM AIWA AKAI AMC ARCAM AUDIO ACCESS AUDIO EASE AUDIO TECHNICA B&K BSR CALIFORNIA AUDIO CAPETRONIC CARRERA CARVER CASIO CLARINETTE CREEK CROWN DENON EMERSON FISHER FRABA GENEXXA GOLDSTAR HAITAI HARMAN KARDON HITACHI INKEL JC PENNY JENSEN JVC KENWOOD KOSS KRELL KYOCERA LOTTE LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH Set-Up Code Number 042 062 059 065 088 089 105 122 170 187 202 231 232 238 119 147 165 046 001 002 037 057 103 063 057 080 041 050 086 107 130 134 135 138
Set-Up Code Tables CD Manufacturer / Brand MCS MEMOREX MGA MISSION MITSUMI MODULAIRE MONDIAL NAD NAKAMICHI NEC NIKKO NSM ONKYO OPTIMUS PANASONIC PARASOUND PHILIPS PIONEER PROCEED PROTON QUASAR RCA REALISTIC ROTEL SAE SANSUI SANYO SCOTT SHARP SHERWOOD SIGNATURE SUMO SYLVANIA SYMPHONIC TANDY TEAC TECHNICS TECHWOOD THETA DIGITAL Set-Up Code Number 014 073 092 010 025 107 153 182 147 005 006 067 095 217 218 219 014 062 046 107 030 038 039 168 010 013 050 057 058 081 082 083 085 093 103 172 201 233 041 107 010
Set-Up Code Tables CD Manufacturer / Brand TOSHIBA VECTOR RESEARCH VICTOR WARDS YAMAHA YORX Set-Up Code Number 006 067 091 148 160 080 004 022 114 124 033 024 046 054 182 * For Future Applications 46
Set-Up Code Tables DVD Manufacturer / Brand B&K CALIFORNIA AUDIO DENON GENERAL ELECTRIC GOLDSTAR JVC KENWOOD LOTTE MAGNAVOX MERIDIAN MITSUBISHI NAD ONKYO OPTIMUS PANASONIC PHILIPS PIONEER PROSCAN REALISTIC RCA RUNCO SANYO SAMSUNG SHARP SONY TECHNICS THETA DIGITAL THOMPSON TOSHIBA YAMAHA Set-Up Code Number 001 002* 008 007 206 207 026 027 057 012 152 032 032 035 035 017 121 035 049 008 021 068 113 032 035 023 106 026 049 027 127 075 056 120 152 033 053 110 008 068 113 032 026 027 035 152 042 129 * For Futu
Set-Up Code Tables TAPE Manufacturer / Brand 3M AIWA ARCHER B&K CARVER DENON DMX EXTRON FISHER GOLDSTAR HARMAN KARDON JVC KENWOOD LINN LUTRON LUXMAN MAGNAVOX MAKITA MARANTZ MCINTOSH NAD NAKAMICHI NILES NSM ONKYO OPTIMUS PANASONIC PHILIPS PIONEER POLK AUDIO QUASAR S/A SANSUI SHARP SHERWOOD SONY TEAC TECHNICS TOSHIBA Set-Up Code Number 152 015 071 100 114 155 001 002 003* 006 008 024 027 105 227 229 156 151 064 011 233 106 116 185 239 240 005 013 023 026 064 145 146 181 190 124 158 159 035 137 139 027 186 01
Set-Up Code Tables TAPE Manufacturer / Brand TURBOSCAN VICTOR X-10 XANATECH YAMAHA Set-Up Code Number 167 106 183 168 169 170 171 172 188 189 021 026 031 067 * For Future Applications 49
B&K Components, Ltd. 2100 Old Union Rd. Buffalo, NY 14227-2725 1-800-543-5252 www.bkcomp.
