User Guide

Using Your Remote

Press and hold both the

Device Button

selected in Step 1 and the

SEL /

PLAY

button for approximately three seconds, until the LCD on the

AV7.1 shows

LEARN

. The AV7.1 is now in the learning mode.

Press and release a button on the AV7.1 you have selected to learn the

new function. The LCD will show

READY

Press and hold the button on the original remote control for

approximately 3 seconds from which you are learning the new function.

The LCD on the AV7.1 will show - - - - - indicating that it is receiving

the information from the original remote control.

Release the button on the original remote control. The LCD on the

AV7.1 will show

RETRY

Press and hold the same button on the original remote once again, for

approximately three seconds. The LCD on the AV7.1 will flash

GOOD

the

Device Mode

and then return to

LEARN

, verifying that the new

function has been learned.

Repeat steps 4 through 7 for any other buttons you wish to learn new functions.

Once you have completed the learning for all the desired buttons in a

Device Mode, store the learned functions by pressing the

Device

and

SEL / PLAY

buttons simultaneously, once again. The LCD in the

AV7.1 will show

SAVED

and then return to the Device Mode. The

remote has now returned to the original operating mode.