User manual

1. AC Fuse Holder - Holds the AC line fuse. Replace only with same type and value 2A fast blow. Note: The voltage rating label is located on the AC fuse holder
cover plate.
2. AC Input Receptacle - For attaching the supplied AC power cord to the unit.
3. HDMI Inputs/Output - 6 input and 1 output High Definition Multimedia Interface (HDMI) connections. Connections carry both the digital audio and digital video
signal simultaneously with output resolutions of 720p, 1080i or 1080p - default set to 1080i.
4. Three-position Phoenix Adapter - Phoenix connection for using a Page / Event system with the receiver.
5. Keypad Connection and IR Daisy Chaining - RJ-45 Keypad Connection provides a 12VDC power, common ground, RS-232 transmit, IR Data IN, and 12V
control output trigger. The receiver will support up to 5 daisy-chained B&K keypads. The IR Chain connection allows linking the receiver to a CT product for full
two-way communication.
6. IR Flashers, All IR Output and IR In - 1/8" Mini-Jack (Tip + Ring -) connections for IR routing. Flasher outputs allow routing of up to 14 source components.
All IR Output will direct all IR information being received by the unit from the Keypad input, front panel or the 1/8" Mini-Jack IR input. IR Input allows an IR sig-
nal to be sent into the unit in order to control the receiver or for routed pass-thru control of a connected source component.
AVR 707 Rear Panel
3
5
1
4
6
7
8 9
10
11
12
13
14
15
18
16
17
2