User manual

Audio Input Connection - Coax Digital
The B&K surround receiver provides eight coax digital audio inputs. These inputs may be used to
send a coax digital audio signal from a source piece to the B&K. Connect the coax digital audio out-
put on the source piece using an RCA cable to the coax
digital audio input on the B&K. Shown is a coax digital
audio source going into the coax digital audio input on
Input 1.
The order of audio signal precedence per each input is Optical Digital -> Coax Digital -> Stereo Analog.
Audio Input Connection - Optical Digital
The B&K surround receiver provides eight optical audio
inputs. These inputs may be used to send an optical audio
signal from a source piece to the B&K. Connect the optical
audio output on the source piece using an optical cable to
the optical audio input on the B&K. Shown is an optical
audio source going into the optical audio input on Input 1.
The order of audio signal precedence per each input is Optical Digital -> Coax Digital -> Stereo
Analog.
Audio Input Connection - HDMI
Although HDMI connection carries both audio and
video, B&K can process audio and video separately
(please see the menu structure for further information).
To connect an HDMI audio source to the B&K, connect
the HDMI cable to the HDMI output on the source
device. Then connect the other end of the cable into
the corresponding HDMI input on the receiver. Multi-
channel PCM over HDMI operation is supported by
selecting the DVD-A on the remote control.
12
Audio Inputs - Hardware Connections