User manual

Front Panel Settings

Adjusts the intensity of the front panel display. may be

set to either High, Medium, Low or Off. Default is set to

High.

Network Settings

MAC Address - Ethernet transport layer number for a device and is unique

for each network device.

DHCP - Dynamic Host Configuration Protocol

Off - Use static IP address

On - Get IP from DHCP

Repair - Request new host address

IP Address - Local device address. The unit IP is obtained from DHCP when

DHCP is on. The IP will be assigned be a DHCP service - typically a router.

Note: When no DHCP server is available and DHCP is set to on the B&K uses

a Link-local address of 169.254.x.y where x and y are random numbers. If

DHCP is set to Off you must set a static IP manually.

Subnet Mask - Unit Subnet Mask is assigned by the DHCP server.

If the DHCP is set to Off (static) optionally manually assign the Subnet Mask.

Gateway - Optionally a DHCP server may assign the Gateway IP Address.

If the DHCP is set to Off (static) optionally manually assign the Gateway.

DNS 1 - Optionally a DHCP server may assign the Primary DNS (domain name server).

If the DHCP is set to Off (static) optionally manually assign DNS 1.

DNS 2 - Optionally a DHCP may assign the Second DNS (domain name server).

If the DHCP is set to Off (static) optionally manually assign DNS 2.

Host Name - String containing Host Name --- (DHCP Option 15). The unit defaults to BK- “the Serial Number”. i.e. BK-123456

Domain Name - String containing Domain Name --- (DHCP Option 15). The unit defaults to null.

BKcSuite System Settings - Control