Instruction manual
Controlling Other Components
En-73
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your
component, you can control your component as described
below.
For details on entering a remote control code for other
components, see “Entering Remote Control Codes”
(➔ page 71).
Controlling a TV
TV is preprogrammed with the remote control code for
controlling a TV that supports the p
*1
(limited to
some models). The TV must be able to receive remote
control commands via p and be connected to the
AV receiver via HDMI. If controlling your TV via
p doesn’t work very well, program your TV’s
remote control code into TV and use the TV remote mode
to control your TV.
Use the following remote control codes:
` 11807/13100/13500:
TV with p
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the p
*1
(limited to some models). The component must be able to
receive remote control commands via p and be
connected to the AV receiver via HDMI.
Use the following remote control codes:
` 32910/33101/33501/31612:
Blu-ray Disc/DVD player with p
*1
The p supported by the AV receiver is the CEC system
control function of the HDMI standard.
■ TV operation
■ Blu-ray Disc player / HD DVD player operation
Controlling Other Components
h
l
m
n
o
i
k
j
g
c
b
d
a
e
f
Press the appropriate REMOTE
MODE button first.
Available buttons
a 8, INPUT, TV VOL q/w,
MUTING
g
Number: 1 to 9, 0
Number: +10
*1
b
GUIDE
i
DISPLAY
c q/w/e/r
ENTER
j
MUTING
k
CH +/–
d
SETUP
l
PREV CH
e 1, 3, 2, 5, 4,
7, 6
*1
m
RETURN
n
AUDIO
*1
f
A
(Red)
*1
o
CLR
B
(Green)
*1
C
(Yellow)
*1
D
(Blue)
*1
Available buttons
b
TOP MENU
h 8SOURCE
c q/w/e/r
ENTER
i
DISPLAY
j
MUTING
d
SETUP
k
CH +/–
e 1, 3, 2, 5, 4,
7, 6
DISC +/–
l
MENU
f
A
(Red)
m
RETURN
B
(Green)
n
AUDIO
*1
C
(Yellow)
o
CLR
D
(Blue)
g
Number: 1 to 9, 0
Number: +10
*1