GUIDE TO INSTALLATION OF THE B & K CK1.
Thank you for choosing to install the B & K CK 1.2 Keypad for this system! Please use this manual as a guide to connecting and mounting the Keypad. The CK1.2 keypad is preprogrammed at the factory to initially operate B & K CT products. It can be re-programmed using a Windows PC and the accompanying CD. See the Keypad Programming Manual on the CD for instructions on programming. B & K Components, Ltd. sells its products through authorized dealers. Buying from an authorized B & K Components, Ltd.
Table of Contents Features and Benefits 1 Basic Controls and Displays 2 Rear Panel Connections 3 Programming Jack - Behind the Faceplate 4 Terminate RJ-45’s One to One 4 Standard CT610/310/600 System Configuration 5 Connecting To A CT610/310/600 6 Keypad Total Power Consumption 7 B & K PT5 Preamp- Perfect for Adding Zones 7 Keypads with Other B&K Preamp/Receivers 8 IR Repeaters for Any Brand of Preamp/Receiver 8 No Emitter for B & K Recievers & Preamps 9 Connecting Slave Keypads 9
Page 1 Features and Benefits Vast Programming Capacity The CK1.2 can be programmed with 44 IR commands for each of up to 20 components or devices. Additionally, you can label the commands with user friendly names that your client will find easy to use. One Touch Automates Operation The On, Off and all of the screen-labeled buttons can be programmed with macros of up to 190 steps (steps can include IR commands, delays of .1 to 99.9 seconds, and Jumps to another Page).
Page 2 Basic Controls and Displays LCD Buttons - Labels on the Screen change depending on what activity has been selected. For example, when CD is the activity, you’ll see the labels change to Play, Stop etc. so that the CD can be controlled. MAIN CD NEWS SAT JAZZ DVD CLASS TAPE Power LED Lights up when this Zone/Room is ON. Screen Title Displays what Source is selected ( i.e. device or activity like “CD” or “SAT”). Main indicates the Main Menu for selecting a new device or activity.
Page 3 Rear Panel Connections MASTER (IN) Connects to the CT610/310/600 via a standard 4 Pair Twisted cable (typically referred to as CAT 5 cable) terminated with an RJ-45 plug. SLAVE (OUT) Connects to the MASTER (IN) of any other same-zone keypads via an RJ-45 plug.
Page 4 Programming Jack - Behind the Faceplate The face plate is removed by prying up from the two screwdriver tabs at the base of the keypad. Once removed, the Programming Jack is revealed: Programming Jack Connect to a laptop PC via the Serial cable included with the CK1.2 keypad. If your PC does not have a serial port, utilize a USB to serial converter.
Page 5 Standard CT610/310/600 System Keypads connect to the Zone Control Connectors on the CT610/310/600 via CAT 5 cables. A/V components connect via standard audio and video cables to the numbered inputs. IR Flashers for A/V components are connected to the IR output corresponding to their A/V Input #. The receiver power amplifiers connect to each Zone speakers via your favorite speaker wire.
Page 6 Connecting To A CT610/310/600 Keypads connect to the CT610/310/600 at the Control terminals. There is a set of five terminals for each of the hardware Zones labeled A-F on the CT610/600 and A-C on the CT310. You can terminate the Keypad cables to the Control terminals in one of two ways: 1. If your cables are already terminated in RJ-45 plugs, order the accessory “Terminal Block to RJ-45 Adapter” (P/N 21419) separately from B & K .
Page 7 Keypad Total Power Consumption The CT610/600 Control 12VDC Outputs can support a Maximum of 26 keypads total. 13 keypads to each vertical array of three zone control connections. Thus, a CT310 can support a maximum of 13 keypads. If you are supplying power to relays, screens or sensors, these must be counted too. Each keypad consumes 75mA.
Page 8 Keypads with other B & K Receivers and Preamps The CK1.2 Keypad can be easily programmed with the commands for all remote controlled B & K receivers and preamps. Because of B & K’s elegant all discrete code architecture, the CK1.2 will automate and delight owners of any B & K receiver or preamp. You can simply connect the keypad to any B & K receiver or preamp directly to control just the B & K (with the addition of an inexpensive 12VDC power supply).
Page 9 No Emitter Needed for B & K Receivers and Preamps B & K receivers and preamps manufactured in the last ten years incorporate a Zone A IR input which will accept IR commands without the addition of a front panel emitter. Utilizing a standard 1/8” mono mini-plug (3.
Page 10 Connecting A Local TV or Device Every keypad can control a local TV or even a local system of components in addition to the components in the main system. A two conductor cable should be run from the Keypad location to the local component location. As many as four infrared emitters can be wired to a keypad by connecting in SERIES as shown here: There is no problem connecting to the Main system via the ALTERNATE MASTER [IN] instead of the MASTER [IN] as shown here.
Page 11 Mounting After connections are made, the CK1.2 installs into a two gang J-Box or an open backed double gang trim ring with the enclosed screws. If you opt to use a closed J-Box, it must be a minimum of 2 3/4” deep to accomodate standard RJ-45 plugs in the rear. If you plan to utilize the ALTERNATE MASTER connections and DO NOT PLAN to add a slave keypad, you could install the CK1.2 in a considerably shallower J-Box (2”).
Page 12 White and Beige Wall Plate Included Once programming is complete and downloaded to each keypad, finish the installation off by installing either the white or the beige wall plate. The wall plate simply snaps into place, first from the top, finishing with the bottom. Filling Out the Operations Manual for the Client Before training your client, it is best to fill out each room’s Operation Manual.
CK1.2 Keypad Specifications Compatible B & K products AVR507/ 505, REF50, PT5, CT610/310/600 Operating Voltage and Current 12VDC @ 75mA Master Inputs 1 RJ-45, 1 Pheonix 5pin Slave Output 1 RJ-45 IR Pass-through 1 Local Flasher Capability Use in line Resistance Installation Requirement Standard Double Gang Keypad Dimensions Height (Faceplate) Width (Faceplate) Depth B&K S IMPLY B ETTER! B & K Components, Ltd. 2100 Old Union Road Buffalo, New York 14227 1.800.543.5252 In NY: 716.656.
