User Guide

Basic CT

Receiver Expanded System - Up to 18 Stereo Zones

A basic expanded system consists of one, two or three CT Receivers, up to nine shared sources, one CT-1

and one Home Theater product. A basic system can require the use of one CT-1, it allows up to three CT

Receivers (or 18 stereo zones) to communicate with one another while also sharing and communicating with

common sources. The following diagrams depict how a basic system is connected. When connecting

multiple CT Receivers to the CT-1, always connect all nine emitters to insure proper IR routing. When any

zone is using the Dedicated input (IN A, IN B, etc.) or the tuner, IR Out #9 is used.

Each CT Receiver needs to be provided with an emitter attached to the front panel. This emitter allows IR to

be sent back to any of the CT Receivers in this system, thus allowing keypads from any CT610/600/310 to

control any or all of these 18 zones.

Single CT-1 Basic Connection

Note: IR data from the CT-1 needs to be

communicated using the front panel of the CT

receiver.

Attach to front panel*

*Attach to front panel

CT610 #3

CT610 #2

CT610 #1