User Guide

IMPLY ETTER!

For a detailed explanation of using Code-Sets and

Groups, see the section: Groups/Code-Set

s/Zones on

page 40.

Select the Group you want to define by using the

Left/Right key when the top row is highlighted as

shown. Once the correct Group is shown use the

Up/Down keys to select Name. Use the Lef

t/Right

keys to activate name editing (blinking cursor). You

may also use the numeric keys to aid in the naming

process: 1=ABC, 2=DEF, etc....

Control System Menu

Control Menu Setup

From the Setup Control Menu use the Up/Down to

highlight a sub menu.

Select by pressing SEL or ENTER.

Setup Zone Room Equalization

irst select which of the six zones you want to configure.

Adjust Treble and Bass frequencies and level using the Left

and Right functions on the remote and Up/Down to move to

the next setting. Use the same remote functions to adjust

notch frequency, gain and width.

For an explanation of Room Equalization and Notch Filtering

see Page 55

Zone Code-Sets/Names and Group Titles