User Guide

22
Display Setup
Set the intensity of the front panel’s alphanumeric display.
From Remote From Front Panel Action
1 From setup menu:
À or §
From setup menu:
.
(TUNE +) or - (TUNE -) move to display setup
2 SEL or ENTER
↵ (ENTER)
enter display setup menu
3
¶(BAL L) or •(BAL R)
VOLUME KNOB set display bright, medium, or dim
4 MENU
◊ (PRESET) and
↵ (ENTER)
return to setup menu
Memory Options
Your Preamplifier Tuner continually saves any settings you have made even if power is lost. However, you may
wish to save a backup of your settings in case of inadvertent changes to them.
From Remote From Front Panel Action
1 From setup menu:
À or §
From setup menu:
.
(TUNE +) or - (TUNE -) move to memory options
2 SEL or ENTER
↵ (ENTER)
enter memory options menu
3
¶(BAL L) or •(BAL R)
VOLUME KNOB select backup or restore memory
4 SEL or ENTER
↵ (ENTER)
activate selected memory operation
5 SEL or ENTER
↵ (ENTER)
confirm selected memory operation
note: this takes a few seconds
6 MENU
◊ (PRESET) and ↵ (ENTER)
return to setup menu
7 MENU
◊ (PRESET) and ↵ (ENTER)
return to main menu
8 MENU
◊ (PRESET) and ↵ (ENTER)
return to normal operation
To restore backup settings perform the same procedure as described above but select restore instead of backup.
If you have never made a backup, then performing a restore will call back the original factory settings.
DISPLAY SETUP DISPLAY BRIGHT
MEMORY OPTIONS BACKUP MEMORY SEL TO CONFIRM