Specifications

204 Chapter 9—Menu Reference
Pin Text Options
The Pin Text... button displays the same text specification box shown above
for Attribute Text. Any changes made to this text style will be applied to all
pin numbers displayed throughout the design. The text changes are applied
when the OK button in the Design Preferences box is clicked.
Rotate Pin Numbers
If this item is checked, pin numbers displayed on all north- and south-
facing pins will be rotated 90
o
to run along the length of the pin. If this
item is unchecked, all pin numbers will be displayed horizontally adjacent
to the pin.
Center in Page
This command on the Schematic menu moves all items on the current page
so that the circuit objects (taken as a group) are centered in the page. This is
intended to assist with situations where a diagram has become lopsided due
to modifications.
Simulation Menu Commands
Speed
The Speed menu is used to control the simulation speed, i.e., the amount of
delay inserted between simulation steps. Simulation speed can be set indi-
vidually for each open circuit.
Stop
This command stops the simulation immediately. No simulation processing
is done when the simulator is in this state.
LW Reference.bk Page 204 Monday, December 15, 2003 5:59 PM