Specifications

12 BK Radio
Option 7: Backlight On Key Press
When 0ption 7 is enabled (flashing), the
display backlight will illuminate each time a
key is pressed, even if pressing the key has
no other effect. The display will not illuminate
if backlight duration is set to LITE OFF. See
"Backlight Duration” on page 15 of this
manual.
Option 8: Silent Mode
When Option 8 is enabled (flashing), all
beeps, tones, and alerts from the radio’s
speaker are silenced. Only normal audio
communication between radio users will be
heard.
Store Global Options Settings
Once each option is set as desired, you can
store the changes, discard the changes, or
disable all displayed options.
Press the [CLR] key to disable all displayed
options (steady).
Press the [ENT] key to store new displayed
options settings into memory and advance to
the next field.
Press the [FCN] key to advance to the next
field without saving changes.
3. Global
Options Two: 2-12345678
After the first group of Global Options is set,
a second group is displayed.
Option 1: Reserved For Future Options
Options 2 & 3: Busy Channel Operation
Options two and three are used to set Busy
Channel operation. There are three types of
busy channel operation available.
PROG
1-12345678
GBL OPTIONS
PROG
1-12345678
GBL OPTIONS
PROG
2-12345678
GBL options
Busy Channel Off
PROG
2-12345678
GBL options
Keypad Programming Manual 13
Busy Channel Modes include:
Busy Channel Indicator - The yellow LED
illuminates when a signal is received on the
channel selected, with or without the
programmed receive Code Guard setting.
Busy Channel Lockout - The yellow LED
illuminates and the transmitter PTT is
disabled when a signal is received without
the programmed receive Code Guard
setting.
Busy Channel Override - This option is
similar to Busy Channel Lockout except the
transmitter PTT can be activated by rotating
the Squelch knob clockwise off the Code
Guard detent.
To set Busy Channel operation, use the
following chart:
Busy Channel Option 2 Option 3
Indication
Disable (Steady) Enable (Flashing)
Lockout
Enable (Flashing) Enable (Flashing)
Override
Enable (Flashing) Disable (Steady)
Options 4 & 5: ANI/DTMF Mode
When Option 4 is enabled (flashing), the ANI
ID number will be transmitted (as a DTMF
tone sequence) with each press of the PTT
switch. See "Automatic Numeric
Identification (ANI)" on the next page for
instructions on setting the ANI number.
When Option 5 is enabled (flashing), the
keypad becomes active for manual DTMF
operation.
When Options 4 and 5 are both enabled
(flashing), the ANI tone sequence will be
transmitted only after the [ENT] key is
pressed while the transmit PTT switch is
activated. A sidetone of the ANI number
transmitted will also be heard through the
speaker.
Busy Channel Override
PROG
2-12345678
GBL OPTIONS
ANI Onl
y
PROG
2-12345678
GBL OPTIONS
DTMF Onl
y
PROG
2-12345678
GBL OPTIONS
DTMF with Manual ANI
PROG
2-12345678
GBL OPTIONS
Busy Channel Lockout
PROG
2-12345678
GBL OPTIONS
Busy Channel Indicator
PROG
2-12345678
GBL OPTIONS