Owner`s manual

SERIAL:
WEEE-Reg.-No.:
DE18339144
B.M.C. Audio, Germany
230V~ / 50Hz, 24W
ANALOG OUTPUTS DIGITAL INPUTS
AC LINE
AES/EBU
TOS
USB
ON
OFF
COAX
BALANCED RCA
R
L
B.M.C.
LINK
ON
OFF
B.M.C.
LINK
BALANCED 2
RIGHT
RCA
R
L
B.M.C.
LINK
SERIAL:
WEEE-Reg.-No.:
DE18339144
230V~ / 50Hz, 60W-300W
BALANCED 1
I
NPUT SECTION
IN
OUT
AC LINE
B.M.C. Audio
Germany
SPEAKER
LEFT
11
Connection Diagrams
Connecting PureDAC to a B.M.C. Amplifier
For connecting the PureDAC to a B.M.C. amplifier like the PureAMP it is
recommended using the B.M.C. Link for the best results.
Ü Connect the analog XLR output to the amplifier’s XLR inputs.
Ü Then connect an optical Toslink cable from the PureDAC’s
“Out” Link to the “In” connector on the B.M.C. amplifier.
Ü Activate the B.M.C. Link by setting the switch on the rear panel to “On”. Do not
use this setting for other configurations.