User Manual

24 Quatech QTM-8524 Manual
2.5 QTM-8524 Jumper Settings
Factory default jumper settings are indicated below.
· Channel 3
· Baudrate (bps) = 9600 bps
· Slave Mode
· RS-232 Interface
· Frequency Channel = 2439.936 MHz
· Full Duplex Mode
· Synchronous Communication
Figure 2.5 on the following page diagrams the other possible jumper set-
tings. See section 4 for more information about how QTM-8524 modules
should be configured for different types of QTM-8000 wireless networks.
Note that the QTM-8524 must be disassambled before jumper settings can
be changed. See section 2.4 for disassembly instructions.