User Manual

30 Quatech QTM-8524 Manual
3.3 Mounting External Antennas
To reduce potential radio interference to other users, the antenna type and
its gain should be chosen so that the equivalent isotropically radiated
power (EIRP) is not more than that required for successful communication.
3.3.1 Mounting the QTM-24ANT-SW
Please refer to Figures 3.3.1.1 - 3.3.1.3 and follow the instructions below to
mount your QTM-24ANT-SW antenna. Be sure to mount the antenna
BEFORE connecting it to the QTM-8524 module. The QTM-24ANT-SW
should be professionally installed.
Reference Description
1 Molded Wall/Mast Mount
2 Molded Articulating Arm
3 Molded Antenna Mount
4 #8-32 x 5/8 Machine Screw
5 #8-32 SS/Nylon Hex Nut
6 1/4-20 x 1-1/4 Machine Screw
7 1/4 SS Split Lock Washer
8 1/4 SS Flat Washer
9 1/4-20 SS Hex Nut
Figure 3.3.1.1 Mounting the QTM-24ANT-SW Steps 1 - 6