User's Manual

• Ifyouperformapartialorincompleteprint,theSP400Xwilltimeout,emitaHi-Lotone,andtheredtaillightswillashonce.

Clear print data

If you ﬁnd that you have an incomplete print or do not wish to print, two options are available:

• PresstheyellowCLEARbuttononthecontrolpanel,thenscanandprintagain.TheSP400Xwillemitasinglemid-tonenoteandthe

green tail lights will turn off after the CLEAR button is pressed.

• WaitfortheSP400Xtotimeoutanderasethescanfromthememory.TheSP400XwillemitaHi-Lotoneandtheredtaillightswill

ﬂash once, letting you know you can scan and print again.

SP400X Series - 5. Operate the SP400X