User's Manual

30
Clean the SP400X
CAUTION: Unplug the battery from the SP400X before doing any cleaning procedure.
CAUTION: Never spray or douse the SP400X with any liquid. Use only dampened wipes, cloths, or swabs to clean the SP400X.
IMPORTANT: Use only materials from the list below to clean the SP400X (see ”CLEANING MATERIALS” below). Other solvents or cleaners
may damage the plastic, paint, or the adhesives used in the SP400X.
Cleaning materials
The following materials may be used to clean the SP400X:
• Cottoncloths
• Cottonswabs
• Babywipes
• Deionizedwater
• Eyeglasscleaningwipes(anti-staticandanti-fogtypesonly)
Clean outside surfaces
Use a cotton cloth dampened with water to clean the outside surfaces of the SP400X.
• Toremovedifcultmaterial,suchasgummyadhesiveorbuilt-upgrime,useacottonclothdampenedwithdeionizedwaterorusea
baby wipe, and dry with a dry cotton cloth.
• Tocleanhard-to-reachplaces,suchasthecoolingribsofthecase,usecottonswabsdampenedwithdeionizedwater.
Clean the imager window
Use eyeglass cleaning wipes to clean the imager window. Eyeglass cleaning wipes provide the best anti-glare cleaning solution.
• Besuretowipeawayanybuild-upfromthecenterareaoftheimagerwindow.
• Cottonswabsmaybeusedtolightlyremovesmudgesfromthewindowedges.
NOTE: If eyeglass cleaning wipes are not available, use a cotton swab dampened with deionized water to clean the imager window.
SP400X Series - 8. Maintain the SP400X