User's Manual

32
Replace the battery cable
1. Remove the hand mount from the SP400X. See ”REMOVE THE HAND MOUNT OR HANDLE ACCESSORY” above.
2. Remove the battery cable by lifting up.
3. Insert a new battery cable..
3. Insert a new finger strap by snapping each buckle into its notch.
4. Reinstall the hand mount.
Replace the nger strap
1. Remove the hand mount. See ”REMOVE THE HAND MOUNT OR HANDLE ACCESSORY.”
2. Remove the finger strap by lifting the old buckles out of the notches.
4. Reinstall the hand mount.
1 Buckle
2 Strap
SP400X Series - 8. Maintain the SP400X