User's Manual

40
FIGURE 9-5 Problems printing correctly
Problem Cause Solution
The print smears after
printing.
The ink is not dry. •Allowmoretimefortheinktodry.
•Trytoavoidprintingonsurfacesthattakelongertodry,
such as plastic sleeves, tape, etc.
•Increaseairowinthearea.
•Makesuretheprintedsurfaceisdry.
•Increasethetemperatureinthearea.
•Lowerthehumidityofthearea
•ChangetoFastDrytemplate.
The ink is not dry due to stacking or contact
with other objects.
Allow the ink to dry before placing printed materials on top
of or next to each other.
Print rubs off The printing was done on a non-porous
material.
Allow the ink to dry before placing the printed area in
contact with other objects.
SP400X Series - 9. Troubleshoot problems and get support