User's Manual
49
SP400X Series - 10. Advanced use
Congure the server
1. Select the Server tab.
NOTE: All IP addresses must be entered using IP address dot notation.
2. Enter the Primary Server IP address.
3. Enter the Primary Server Port.
4. Enter the Alternate Server IP address.
5. Enter the Alternate Server Port.
6. Enter the File Server IP address.
7. Enter the File Server Port.
Design print templates
Use the Handheld SP400X Series Template Design Software to design print templates for the SP400X.
1. Download the Handheld SP400X Series Template Design Software at www.handheldgroup.com/manuals.
2. Use the software to lay out dynamic data fields and static data and images for your template.
IMPORTANT: The field name given to a dynamic text field and the field width must match the field name and width used by the server. The
print template name must also match the print template name used by the server application.
4. Perform a print test if desired.
5. Save the template on your SP400X
NOTE: For more detailed instructions and help, see the HANDHELD SP400X SERIES TEMPLATE DESIGN SOFTWARE USERS GUIDE.
It is available at www.handheldgroup.com/manuals.
Use the default print templates
Four default print templates are already saved on the SP400X.
There are three non-wireless templates for use in demonstration mode (where a wireless connection is not used):
•Systeminformat
•SP400XDemoprinttemplate
•PenDiagnosticprinttemplate
There is one wireless print template (for use with a wireless connection):
•SP400XDefault(wireless)printtemplate