User's Manual

7
SP400X Series - 1. Introduction
SP400X components
The Handheld SP400X is designed to be worn comfortably on the hand and arm when performing scanning, printing, and package handling
tasks.
The SP400X consists of the following key components:
• Abattery
• Installedinsideaforearm-mountedwristcase;or
• Installedintothebottomofahandleaccessory
• Thescannerprinterdevice
• Attachedtoahandmount;or
• Attachedtoahandleaccessory
IMPORTANT: If you are using the handle accessory instead of the hand mount, see the instructions that were included with the handle
accessory.
1. Battery inside wrist case
2. Control panel
3. SP400X
4. Hand mount