Issued:4.22.2020 No.
5-bit system Reader Contents 1. Description 1.1 Description ・ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 1.2 System configuration ・ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 1.3 Each role ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 1.4 5bit format system・ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 2. Specifications・ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 3. Installation and Wiring・ ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5 4.
5-bit system Reader 1. Description 1.1 Description The 5bit system is an ID system that easily reads 5bit data without any special program. This Read-Only system needs no particular program to read data, for the Reader reads data of a Data carrier automatically when the Data carrier come into the reading area of the reader. The 5bit system is an ID system that easily reads 5bit data without any special program. An ID reader / writer (Z6-01-U) is available for writing data.
5-bit system Reader 2.
-bit system Reader ■ LED display contents Condition ON OFF Blinking (Quickly) Blinking (slowly) Meaning A state in which data can be correctly read from the tag and data is being output. (Keep lit for 0.5 to 0.7 seconds even if the tag is out of communication area while it is lit.) The tag is out of the communication area. (All outputs are off.) Output over current condition. (Repeat with 50ms on and 50ms off. Over current protection works. ) Data check error condition. (Repeats 0.
5-bit system Reader ■ Wiring Diagram [NPN type] External Power Unit 24V Reader Z5-EA05(BK)N-_ _ Data Data Data Data Data Data External power supply 24V Reader Z5-EA05(BK)P-_ _ Z5-EA05(BK)P-FCC-02 0V White Black Brown Red Yellow Green Blue Gray [ PNP type ] Host device Input D0 input D1 input D2 input D3 input D4 valid input DV Host device 0V White Black Brown Red Yellow Green Blue Gray Data Data Data Data Data Data Input D0 input D1 input D2 input D3 input D4 valid input DV Attention - Maximu
5-bit system Reader ■ About FCC Certification Z5-EA05P-FCC-02 and Z5-EA05BKP-FCC-02 complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
5-bit system Reader 4. Communication with the External Unit ■ Data Reading Timing Chart 1 In case of normal reading Min.500ms〜 Max.700ms ID tag IDタグ Data valid データ有効 IDタグ (DV) Yes 有 No 無 IDIDタグ tag ON 有 IDタグ OFF 無 Read data ON 読取りデータ データ有効 (D0〜D4) (DV) OFF Min.500ms〜 Max.700ms Min.500ms〜 Max.700ms IDIDタグ tag DV DV IDタグ DV D0〜D4 A B 読取りデータ ON (D0〜D4) OFF DV D0〜D4 A B B D0〜D4 A Timing Chart 2 Min.500ms〜 Max.700ms B B A:Max.50ms B:10〜30ms B A:Max.50ms B:10〜30ms D0〜D4 Min.
5-bit system Reader
5-bit system Reader 5. Available ID tag and reading distance 金属 metal Applicable Data carrier Z1-AA04-02K, Z1-EC02-128, Z1-EA02-128, Z1-FA01-128, Z1-FB01-128 A C A distance of 200 mm or more is required between the tag and its surrounding A. (See below) · Metal attachment refers to a state where it is installed directly on a metal (C:0 mm). Nonmetallic attachment refers to a state in which the metal and the tag are installed with securing a certain distance (C) or more on the back side.