User Manual
5-bit system
Reader
Contents
１． Description
1.1 Description ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3
1.2 System conguration ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3
1.3 Each role ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3
1.4 5bit format system ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3
2. Specications ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・4
３． Installation and Wiring ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・5
4. Communication with the External Unit ・・・・・・・・・・・・・・・・・・・・・・・・・・・8
５． Available ID tag and reading distance ・・・・・・・・・・・・・・・・・・・・・・・・・ 10
Safety Considerations
(Please read through before use)
Before using this product, please carefully read this instruction manual, pay attention to safety, and handle it
properly.
Design considerations
◆ This product constitutes the identication system together with the ISO 15693 compliant ID tag.
Please do not use for other uses.
◆ Please design the system so that the entire system works on the safe side even if the external power supply
malfunction or this product breaks down
◆ Please design the system carefully and not to exceed the range of the equipment specication described in
this instruction manual for power supply / usage conditions.
Usage considerations
◆ Use a regulated power supply, e.g. switch-model type.
There is a risk of re or heat generation exceeds the rated voltage power is being
supplied"
◆ "When wiring the processor, follow the chapters containing the wiring diagrams
closely, and wire all connections properly.
Incorrectly connected wiring may cause malfunction or unexpected problems."
◆ When installing, maintaining, troubles etc. concerning this product, be sure to turn o the power, please go.
◆ Do not disassemble or modify the processor.
Which may cause failure,malfunction, injury or re.
◆ To avoid malfunction caused by induction noise, cable should be kept apart from motor or other power cable.
◆ When disposing of the processor, treat it as industrial waste.