User Manual

5-bit system
Reader
■ Installation of Z5-EA05(BK)P-FCC-02
The ferrite core and the noise lter must be properly installed as follows in order to comply with the FCC
■ About FCC Certication
Z5-EA05P-FCC-02 and Z5-EA05BKP-FCC-02 complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
■ CAUTION
Changes or modications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
■ Wiring the power lines
The cable used for the wiring from the noise lter to the power supply must be prepared by the customer and
wrapped around a 6T ferrite core clamp.
Recommended Cable・・・AWG24 or 26、Any color、About 70cm
White
Black
Brown
Blue
Brown
■ ID reader
Z5-EA05P-02 or Z5-EA05BKP-02
[ Installation ]
7 ± 1 cm
■ Ferrite core clamp
E04SRS251512
2 turns
■ Ferrite core clamp
E04SR200932
6 turns
Noise filter
RSEL-2001W
■ Ferrite core clamp
E04SR401938
3 turns
・Type code
・Company Name
・Indication of Japan's
Ministry of Internal
Affairs and Communi-
cations designation
・FCC ID
Blue
Brown
Red
Yellow
Green
Blue
Gray
About 10 cmAbout 10 cm
7 ± 1 cm