Data Sheet

ManualsBrandsBÜRKERT ManualsMagnetic ValvesSolenoid Valve

1/7www.burkert.com

6213

can be combined with…Type6213

The 6213 EV valve is a servo-assisted so-

lenoid valve of the S.EV series. The spring

coupling of the diaphragm supports the

opening process of the valve. In its stand-

ard version, the valve is suitable for use

in liquids. A minimum dierential pressure

is required for complete opening. A spe-

cial version (HP00) which opens the valve

without dierential pressure is available for

gas and vacuum applications. Various dia-

phragm material combinations are available

depending on the application. The standard

brass housing satises all European drinking

water requirements. Lead-free or dezinci-

cation-resistant brass types are available

for other markets. The housing oering is

rounded out by a stainless steel version. For

reduced energy requirement, all coils can be

delivered with electronic power reduction. In

combination with a plug in accordance with

DIN EN 175301-803 Form A, the valves sat-

isfy protection class IP65 – in combination

with a stainless steel housing NEMA 4X.

• Servo-assisted diaphragm with diameter of up to DN40

• Spring coupled diaphragm opens without dierential pressure

• Vibration-proof, screwed coil system

• Damped design for quiet closing

• Compact construction with high ow rate

Servo-assisted 2/2 way diaphragm

valve

Type2508

Technical data

Orice Standard DN10 … 40 mm

HP00: DN13 … 20

Body material Brass acc. to DIN EN 50930-6, stainless steel 1.4408 (316),

nickel-plated brass (5 µm), gunmetal (external thread)

Inner part of valve

Brass body

Stainless steel body

Brass, stainless steel and PPS

Stainless steel and PPS

Seal material NBR, FKM, EPDM

Medium

NBR

FKM

EPDM

Neutral uids, water, hydraulic oil, oil without additives

Per-solutions, hot oils with additives

Oil and fat-free uids and gases

Ambient temperature Max. +55 °C

Medium viscosity Max. 21 mm

Medium temperature

NBR

FKM

EPDM

-10 … +80 °C

0 … +90 °C with polyamide coil / 0 … 120 ºC with epoxy coil

-30 … +90 °C with polyamide coil

-30 … +100 °C with epoxy coil

Voltages Standard 024/DC, 024/50, 230/50, 110/50, 120/60

HP00: 24 V (50 … 60 Hz), 230 V (50 … 60 Hz)

Voltage tolerance ±10 %

Duty cycle 100 % continuous rating; KD coil 50 % max. rating 6 circuit

switches/minute

Electrical connection Tag connector acc. to DIN EN 175 301-803 Form A

(see ordering chart for accessories, page 7)

Protection class IP65 with cable plug

Installation As required, preferably with actuator upright

Circuit function A

2/2 way servo-controlled

solenoid valve,

normally closed

2 (A)

1 (P)

Measured at valve outlet at 6 bar and +20 °C

Opening: pressure build-up 0 … 90 %

Closing: Pressure drop 100 … 10 %

Response times

0.1 … 4 sec.

(depending on orice and dierential pressure)

Contents:

Page

Technical data 1-2

Dimensions 3-4

Ordering chart 5-6

Accessories 7

Summary of content (7 pages)

PAGE 1
6213 Servo-assisted 2/2 way diaphragm valve • Servo-assisted diaphragm with diameter of up to DN40 • Spring coupled diaphragm opens without differential pressure • Vibration-proof, screwed coil system • Damped design for quiet closing • Compact construction with high flow rate Type 6213 can be combined with… Type 2508 The 6213 EV valve is a servo-assisted solenoid valve of the S.EV series. The spring coupling of the diaphragm supports the opening process of the valve.
PAGE 2
6213 Technical data Power consumption Orifice Coil size [mm] [mm] 10 10 13 13 13 20 20 20 25 25 40 40 32 40 32 40 42 32 40 42 42 65 42 65 AC DC Inrush Hold Cooling capacity [W] 11 Heat performance [W] 10 11 21 10 16 11 21 10 16 28 21 28 21 [VA] 34 36 125 38 140 150 190 - [VA] 14 14 37 14 37 37 37 - [W] 8 10 8 10 16 8 10 16 16 16 - KD-Coil AC/DC ²) AC Cooling capacity¹) Inrush (500 ms) [W] [VA] 44 44 85 85 - DC Cooling capacity¹)) Hold [W] 6.5 6.5 8.5 8.
PAGE 3
6213 Dimensions [mm] coil dimension K O G 1 G 1 A B O M J F1 F 1 SW H E 12 L J C K Coil dimensions Coil size H J K O M 5 32 20.5 45 41 3.4 6 40 23.5 51 41 3.4 K 42 27 55.5 64 7 L 65 37.5 72 64 7 H D 1 The dimensions F1 and G 1 apply to G-threads The dimensions F2 and G 2 apply to NPT-threads The dimensions F3 and G 3 apply to RC-threads 2 only as brass - thread port version 3 only as stainless steel - thread port version DN 10 10 2 10 3 A 71.1 B C 82.
PAGE 4
6213 Dimensions [mm] (cont.) cast iron version HP00 Version Dimensions (coil, 42 mm) DN 20 A B 119.3 139.8 116.8 132.8 C 65 D 76.6 104.3 120.3 13 102.6 115.6 44.5 56 2E *G (MS/VA) F1 G1 F2 G2 F3 G3 37.5 18 G1 16.8 NPT 1 16.8 Rc 1 37 16 G¾ 14 NPT ¾ 14.5 Rc ¾ 32.5 16 G¾ 14 NPT ¾ 14.5 Rc ¾ 27.2/32.5 27.2/32.5 14 * NPT G½ 13.7 * Rc NPT ½ 13.2 L Rc ½ H J K (MS/VA) 80 42 27 55.
PAGE 5
6213 Ordering chart for valves (other versions on request) Valves with brass body, DN10 … 40 mm Article no. per voltage/frequency [V/Hz] Circuit function Port connection Orifice [mm] KV value water [m3/h] 1) 4) Pressure range [bar] 2) Weight [kg] (DC) 3) 024/DC 024/50 230/50 Brass body, NBR Diaphragm, polyamide coil, medium temperature -10 … +80 °C G¼ 10 1.3 0 … 10 0.3 (0.5) 221674  221675  221677  G⅜ 10 1.9 0 … 10 0.3 (0.5) 221598  221599  221601  G½ 10 1.9 0 … 10 0.4 (0.
PAGE 6
213 Ordering chart for valves (other versions on request) Valves with Stainless steel body; DN10 … 40 mm Article no. per voltage/frequency [V/Hz] Circuit function Port connection Orifice [mm] KV value water [m3/h] 1) 4) Pressure range [bar] 2) Weight [kg] (DC) 3) 024/DC 024/50 A 2/2 way servo-controlled solenoid valve, normally closed Stainless steel body, NBR Diaphragm, polyamide coil, medium temperature -10 … 80 °C G⅜ 10 1.9 0 … 10 0.3 (0.4) 222150  222151  G½ 13 3.6 0 … 10 0.4 (0.
PAGE 7
6213 i Further versions on request Port connection NPT, Rc, GS Temperature Special temperature ranges Voltages further Voltages available Body material Brass dezincification resistant Nickel-plated brass (5 µm) Gunmetal Unleaded brass DN10 - DN20(¾") Approvals Safety shut-off valve for firing systems acc. to DIN EN ISO 23553-1 drinking water approval acc. to KTW/W270 VDE Approval acc.