Datasheet
6014P
p. /3www.burkert.com
Type 2012
Globe valve
Type 1078
Timer unit
Type 2512/2511
ASI cable plug
3/2-way Direct Mounting Pilot Valve
Type 6014P can be combined with...
• Suitable for all Bürkert process valves
• Ready for direct mounting
• Reduced power consumption
• Push-over solenoid coil
• Manual override
The direct acting 3/2-way valve, Type 6014
is a specially developed pilot valve for exter-
nally controlled actuators. (e.g. Type 2000,
2012, 2030, 2031). It consists of valve Type
6014 with sub-base connection and a banjo
bolt connection.
With the banjo bolt the valve can be fastened
very simply to the pilot air port of the actuator.
Circuit function C
Technical data
Orice
DN 1.5 and 2.0
Material
Flange body (valve)
Banjo bolt
Banjo coupler
Brass or polyamide (PA)
Brass, nickel-plated resp. Aluminium, anodized
Aluminium, anodized resp. IXEF
®
*
Seal material
FKM
Media
Neutral gases and uids, compressed air
Media temperature
-10 up to +100 °C
Ambient temperature
Max. +55 °C
Voltage tolerance
±10%
Duty cycle
100% continuous rating
Electrical connection
Tag connector acc. to DIN EN 175301-803 (previously
DIN 43650), Form A for cable plug
Protection class
IP 65 with cable plug
Installation
As required, preferably with actuator upright
Power consumption
Orice Inrush AC Hold AC (hot coil) DC (hot coil)
[mm] [VA] [VA] [W] [W]
1.5 11 6 2 2
2.0 24 17 8 8
Response times [ms]:
Measured at valve outlet at 6 bar and +20 °C
Opening: pressure build-up 0 to 90%, closing: pressure relief 100 to 10%
Response times
AC DC
Orice [mm] Opening [ms] Closing [ms] Opening [ms] Closing [ms]
1,5 ca. 25 ca. 35 ca. 25 ca. 35
2,0 ca. 18 ca. 22 ca. 18 ca. 22
3/2-way valve, NC
* IXEF
®
is a registered trademark of SOLVAY S.A.