Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
GB Congratulations Congratulations on your purchase of the B-Speech® ISAS headset. This headset allows you to communicate wirelessly through your mobile phone and includes a built in microphone and earphone. It uses Bluetooth® 2.0 technology, but is also compatible with mobile phones using Bluetooth® version 1.2 and 1.1 technology. Your B-Speech® ISAS headset uses a built in rechargeable Lithium Polymer battery, with long life.
GB 6. 7. 8. 9. Mulitfunction key Status LED Earhook hinge Charging port 8 6 7 9 The headset can be worn on either ear. Just clip the ear hook onto the preferred side.
GB Charging the internal battery Before using your headset, please charge the internal battery. To charge the battery: 1. Connect the USB Charger to a USB port or connect the AC adaptor to an electrical outlet. 2. Plug the adaptor's connector into the charging port of B-Speech® ISAS 3. While charging, the red LED light will stay on and turn off when charging is complete. Then you can unplug the adaptor's connector from the headset and disconnect the adaptor from the electrical outlet. 4.
GB Pairing Procedure Your B-Speech® ISAS needs to be paired to your Bluetooth® mobile phone before it can be used. This is a two part process; one part is carried out on the headset and the other is carried out on the mobile phone. Note: Different mobile phones use a different method to go through the pairing process. To pair your B-Speech ISAS: 1.With your headset turned off, press and hold the Multifunction key 7 sec.
GB Phone call use Making a call from the mobile phone While your mobile phone is paired with your headset, you can use the mobile phone to make phone calls in the same way as normal. The only difference will be that the earphone and microphone functions of the headset will be used instead of the phone's. Answering a call To answer a call after a ring tone will appear in your headset, simply press the Multifunction key.
GB Note: To use voice dialling, the corresponding voice profiles must be stored in your Phone. Your Mobile must also support this function. Last number redial When the headset is in standby mode (not in conversation), press the volume + key 2 second,(a tone appear) and your phone will redial the last number you called. Note: This function only works on Bluetooth® phones that support the Handsfree profile.
GB Adjusting the volume • To increase the volume, press shortly the increase volume key. • To decrease the volume, press shortly the decrease volume key. Bluetooth® headset specification Compatible with Bluetooth® Ver.2.0 or 1.
GB This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices, you are making an important contribution to protecting our environment. B-Speech® declares herewith that this device carries the CE mark in accordance with the regulations and standards of the guideline R&TTE (1999/5/EG).
