User manual

ManualsBrandsB-TECH ManualsSpeaker AccessoriesSpeaker ceiling mount Tiltable, Swivelling, Rotatable Max. distance to floor/ceiling: 11.5 cm DECKENHALTER FÜR S

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

INSTALLATION TOOLS REQUIRED

FEATURES

BT34

HOME CINEMA SPEAKER WALL / SPEAKER

MOUNT

INSTALLATION GUIDE & PARTS LIST

This Pack Contains 1 Mount

Installation Safety Notes.....................................................................................................................2

Parts List.............................................................................................................................................4

Installation Instructions.......................................................................................................................6

Product Dimensions..........................................................................................................................11

B-Tech Contact Details.....................................................................................................................12

PLEASE KEEP THIS FOR FUTURE REFERENCE

Crosshead / Flathead

screwdriver

Drill

Pencil

● Designed for home cinema speaker mounts up to 5kg (11lbs)

● Features +/-90° tilt adjustment and full 360° swivel

● Can be ceiling or wall mounted

● Includes adaptors for single, dual point and keyhole fixings

● Suitable for speakers using M5, M6 and UNC ¼” screws

● Distance between dual point fixings:

Min: 51mm (2”) – Max: 67mm (2.6”)

● Cover plate included for smart installation

● Simple installation with all mounting hardware included

8mm (5/16") masonry bit

or 3mm (1/8") wood bit

Summary of content (12 pages)

PAGE 1
BT34 HOME CINEMA SPEAKER WALL / SPEAKER MOUNT INSTALLATION GUIDE & PARTS LIST This Pack Contains 1 Mount PLEASE KEEP THIS FOR FUTURE REFERENCE FEATURES ● Designed for home cinema speaker mounts up to 5kg (11lbs) ● Features +/-90° tilt adjustment and full 360° swivel ● Can be ceiling or wall mounted ● Includes adaptors for single, dual point and keyhole fixings ● Suitable for speakers using M5, M6 and UNC ¼” screws ● Distance between dual point fixings: Min: 51mm (2”) – Max: 67mm (2.
PAGE 2
INSTALLATION SAFETY INSTRUCTIONS CAUTION: This speaker mount is intended for use only with the maximum weights indicated. Use with speakers heavier than the maximum indicated may result in instability causing possible injury. Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference.
PAGE 3
CS Společnost B-Tech International Ltd. doporučuje provést instalaci tohoto produktu prostřednictvím odborného instalátora AV či jinak způsobilé osoby. Společnost B-Tech International Ltd, její distributoři a prodejci nenesou odpovědnost za škody nebo zranění způsobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné konstrukce a používat jen po uvedenou maximální výšku. DE B-Tech International Ltd.
PAGE 4
BT34 PARTS LIST 2 9 1 2 8 3 MOUNT ASSEMBLY 10 11 4 10 11 5 10 6 Suitable for loads up to 5kg (11lbs) 7 4
PAGE 5
SPEAKER INTERFACE KIT (FOR ATTACHING MOUNT TO BACK OF SPEAKER) A B C F G I J D H E REF PART NAME QTY 1 2 3 4 5 6 7 8 9 10 11 12 CEILING PLATE COVER PLATE LONG EXTENSION ROD BALL JOINT BALL JOINT ADAPTOR SINGLE POINT ADAPTOR INTERFACE ADAPTOR SPACER M8 NUT M6 X 6mm GRUB SCREW M6 X 10mm GRUB SCREW 3mm HEX KEY (FOR PARTS 10 & 11) 1 2 1 1 1 1 1 1 1 3 2 1 INTERFACE KIT A B C D E F G H I J M5 x 12mm SCREW M6 x 12mm SCREW ¼” x ½” UNC SCREW M5.
PAGE 6
INSTALLATION INSTRUCTIONS 1 Remove the cover plates and the single point adaptor from the mount.
PAGE 7
2 Fix the mount to a ceiling / wall using one of the following methods. Then reattach covers. i. Plasterboard. ii. Wood / wood stud. WALL PLUGS NOT INCLUDED A3 1 1 A2 A1 iii. Concrete.
PAGE 8
3 Choose one of the four fixing methods shown that suits your speaker fixings i. Single threaded insert J I 6 6 F G H F G H SPEAKER ii. Dual threaded insert 6 7 J 7 I A B C SPEAKER F G H iii. Keyhole insert 6 A 6 6 E iv.
PAGE 9
4 Attach the speaker to the mount, and secure using part 10.
PAGE 10
5 To adjust tilt and swivel, loosen parts 10, adjust angle of speaker then retighten parts 10.
PAGE 11
BT34 PRODUCT DIMENSIONS 92mm 3.6" 115mm 4.5" 145mm 5.7" 145mm 5.7" 92mm 3.6" 52mm 2.0" CEILING PLATE 45mm 1.8" 6.5mm .3" 67mm 2.6" 51mm 2.0" 88mm 3.5" SINGLE FIXING ADAPTOR 24mm .9" 24mm .9" 6.5mm .3" 6.5mm .3" 24mm .9" O DUAL FIXING ADAPTOR 67mm 2.6" 51mm 2.0" 88mm 3.5" M6 THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
PAGE 12
www.btechavmounts.com B-TECH AUDIO VIDEO MOUNTS HEAD OFFICE Bennett House, Long March, Daventry, Northants., NN11 4NR, UK Email: info@btechavmounts.co.uk EUROPE BELGIUM Brixtonlaan 32, Zaventem 1930, Brussels, Belgium Email: info@btechproav.com NORTH AMERICA 203 Eggert Road, Buffalo, NY 14215, USA Email: info@btechavmounts.com GERMANY Dyrotzer Weg 26A, 14612 Falkensee, Berlin, Germany Email: info@btechdeutschland.com SINGAPORE Ruby Industrial Complex, Singapore 347740 Email: info@btechavmounts.com.