Installation guide

ManualsBrandsB-Tech ManualsProjector MountsBT883

BT883

PROJECTOR CEILING MOUNT

WITH ADJUSTABLE DROP

INSTALLATION GUIDE & PARTS LIST

This Pack Contains 1 Mount

Installation Safety Notes.....................................................................................................................2

Parts List.............................................................................................................................................4

Installation Instructions.......................................................................................................................6

Product Dimensions..........................................................................................................................15

B-Tech Contact Details.....................................................................................................................16

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

INSTALLATION TOOLS REQUIRED

FEATURES

12mm (1/2") masonry bit

or 8mm (11/32") wood bit

Level

(optional)

PLEASE KEEP THIS FOR FUTURE REFERENCE

Crosshead

screwdriver

Drill

Pencil

13mm (1/2") spanner

or socket

REG. DESIGN NO: 3016251

● Suitable for projectors up to 10kg (22lbs)

● Hand lever for easy adjustment of ceiling drop:

Min 750mm (29.5”) – Max 1222mm (48”)

● +/-90° tilt adjustment, +/-90° roll adjustment & 360° swivel

● Unique ‘carousel’ mounting plate for universal compatibility

● Suitable for angled / cathedral ceilings

● Integrated cable management

● Maximum distance between any two fixing points on

projector: 340mm (13.5”)

● Suitable for projectors with M2.5, M3, M4, M5 and M6 fixings

● Simple installation with all mounting hardware and fixings included

REG. DESIGN NO: 3016251

Summary of content (16 pages)

PAGE 1
BT883 PROJECTOR CEILING MOUNT WITH ADJUSTABLE DROP INSTALLATION GUIDE & PARTS LIST This Pack Contains 1 Mount PLEASE KEEP THIS FOR FUTURE REFERENCE FEATURES ● Suitable for projectors up to 10kg (22lbs) ● Hand lever for easy adjustment of ceiling drop: Min 750mm (29.
PAGE 2
INSTALLATION SAFETY INSTRUCTIONS CAUTION: This ceiling mount is intended for use only with the maximum weights indicated. Use with projectors heavier than the maximum indicated may result in instability causing possible injury. Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference.
PAGE 3
CS Společnost B-Tech International Ltd. doporučuje provést instalaci tohoto produktu prostřednictvím odborného instalátora AV či jinak způsobilé osoby. Společnost B-Tech International Ltd, její distributoři a prodejci nenesou odpovědnost za škody nebo zranění způsobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné konstrukce a používat jen po uvedenou maximální výšku. DE B-Tech International Ltd.
PAGE 4
BT883 PARTS LIST 5 Tube and Ceiling Plate Assembly 1 10 9 6 2 11 Interface Assembly 15 3 20 21 7 12 8 14 4 9 17 Suitable for loads up to 10kg (22lbs) 13 4 16 10
PAGE 5
A REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 REF A B C D E F G H B F C D G E H I J I J 18 19 REF A1 A2 A3 PART NAME CEILING BRACKET UPPER EXTENSION POLE LOWER EXTENSION POLE ADAPTOR CEILING BRACKET COVER PLATE M8 METAL WASHER M6 X 6mm GRUB SCREW M6 X 10mm GRUB SCREW M8 SPRING WASHER M8 X 20mm HEX SCREW ADJUSTMENT LEVER SECURITY CABLE CAROUSEL THUMBWHEEL LONG LEG SHORT LEG CAROUSEL COVER PLATE M6 DOME NUT M6 X 11mm SPACER (FOR PART K) 3mm HEX KEY (FOR PARTS 7 & 8) 5mm HEX KEY (FOR
PAGE 6
INSTALLATION INSTRUCTIONS 1 Attach upper extension pole to ceiling plate.
PAGE 7
2 Fix ceiling plate to the ceiling. ONLY USE PART A3 WHEN FIXING TO CONCRETE CEILINGS i. A3 1 A2 A1 ii.
PAGE 8
3 Attach interface assembly to projector. i. Attach legs to projector.
PAGE 9
ii. Attach part 4 to carousel and place on legs. 4 13 9 10 21 iii. Attach the carousel to the legs. Using quick release hand wheels or using secure dome nuts and spacers.
PAGE 10
4 Attach projector to lower extension pole.
PAGE 11
5 Attach the security cable. i. Un-screw the interface screw to attach security cable. 12 ii. Loop the security cable over the leg.
PAGE 12
iii. Re-attach the leg to the projector.
PAGE 13
6 Adjusting the projector. i. To adjust drop, loosen hand lever, adjust drop, then re-tighten. 11 UP / DOWN ii. To tilt/roll and swivel, loosen parts 7, adjust and re-tighten.
PAGE 14
7 Slide cover plates onto interface assembly. 17 13 Cable managment.
PAGE 15
BT883 PRODUCT DIMENSIONS INTERFACE PLATE O 188mm 7.4" 150mm 5.9" 200mm 7.9" O 35mm 1.4" MAX 340mm 13.4" 10.5mm 0.4" 30mm 1.2" CEILING PLATE MAX 150mm 5.9" 340mm 13.4" 200mm 7.9" 40mm 1.6" 20mm 0.8" 830mm 32.7" O 42mm 1.7" O 35mm 1.4" MIN 20mm 0.8" 1330mm 52.4" 50° MAX 40mm 1.6" 205mm 8.
PAGE 16
www.btechavmounts.com B-TECH AUDIO VIDEO MOUNTS HEAD OFFICE Bennett House, Long March, Daventry, Northants NN11 4NR, UK Email: info@btechavmounts.co.uk EUROPE Brixtonlaan 32, Zaventem 1930, Brussels, Belgium Email: info@btechproav.com NORTH AMERICA 203 Eggert Road, Buffalo, NY 14215, USA Email: info@btechavmounts.com ASIA PACIFIC Ruby Industrial Complex, Singapore 347740 Email: info@btechavmounts.com.sg ©2009 Bennett Technologies Limited. All rights reserved.