P5 Wireless Headphones
ENGLISH Welcome to Bowers & Wilkins and the MH-W Wireless Headphones Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it inspires every product we design.
ENGLISH 1. MH-W Carton Contents i. MH-W Headphones ii. USB charging cable iii. Universal cable iv. Quilted pouch i. Literature pack Environmental Information This product complies with international directives, including but not limited to the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment, the Registration, Evaluation, Authorisation and restriction of Chemicals (REACH) and the disposal of Waste Electrical and Electronic Equipment (WEEE).
ENGLISH 4. Switching On and Off To switch MH-W on or off slide the power switch. MH-W will provide audible feedback as it switches on. Note: If an MH-W is left switched on but inactive for more than 20 minutes it will automatically enter sleep mode to save battery power. It can be woken by starting a Bluetooth audio stream from a paired device, by siding the power switch, or pressing the Bluetooth button. 5.
ENGLISH while pairing is underway and blink once in every 4 seconds when pairing is established. MH-W will also provide audible feedback when pairing is established. Note: If your Bluetooth audio source device does not support “simple” pairing and requests a four digit code, enter ‘0000’. Once a connection has been established, ensure that MH-W is selected as the speaker output for the Bluetooth source device. Audio will then be heard through MH-W.
ENGLISH 9. MH-W wired connection In addition to operating wirelessly, your MH-W can be connected to a music source using the supplied universal cable. Cable connection is useful if the MH-W battery is low or if the MH-W is to be used with a non-Bluetooth audio source device. To connect the supplied cable to your MH-W proceed as described in the following steps and illustrated in Diagram 3. Carefully pull the left ear pad away from the body of the ear piece.