Installation Instructions

Your Panorama 3 sound bar is primarily intended to be controlled by the TV remote control or
the Bowers & Wilkins Home app, however on-body buttons provide volume controls and
play/pause control.
A reset button adjacent to connection sockets enables the Panorama 3 to be returned to its
default factory settings.
2. Wall Mounting your Panorama 3
If your Panorama 3 is to be wall mounted, the bracket screw hole positions on the wall must first
be established. Use a spirit level to ensure the bracket is level before marking the hole
positions. Drill and plug the wall for appropriate screws. A second person to assist with marking
holes and lifting the Panorama 3 is recommended.
Use wall plugs that are appropriate for the type of wall construction and ensure that the wall,
plugs and screws are capable of reliably supporting the weight of the Panorama 3. If you have
any doubt over your ability to mount the bracket securely to the wall you should engage
specialist help. Once the bracket has been secured to the wall, the Panorama 3 can be lifted
onto the bracket and secured.
3. Connecting your Panorama 3
Use the mains cables supplied to connect the Panorama 3 to a mains power socket. The sound
bar will switch on automatically when mains power is connected and enter its default
configuration state, indicated by its indicator.
If your Panorama 3 installation requires either a wired or wireless network connection or
television audio or connection, the network and television audio cables should be connected to
the Panorama 3 via its rear panel sockets. The Bowers & Wilkins Home app provides step by
step guidance on configuring Panorama 3 connections.