Installation Instructions

4. Setting up your Panorama 3
Once connected to mains power your Panorama 3 can be configured and set up using
the Home app. If you have not already downloaded and installed the app on your iOS or
Android device please do so now.
The Home app will guide you through the following configuration and setup stages so that your
Panorama 3 is ready for use.
• Product Identification: Enables your Panorama 3 to be named and the type of installation to be
specified.
• Network Connection: Configures your Panorama 3 appropriately to connect to your home
network.
• Music Streaming Setup: Enables your Panorama 3 to connect to and stream audio from a
range of music streaming services or from local network storage devices.
• Input Configuration: Configures your Panorama 3 appropriately to use your television audio
output.
• Firmware Updates: If any firmware updates are available for your Panorama 3 they will be
automatically installed.
5. Using your Panorama 3
With the Home app setup process complete your Panorama 3 is ready for use. You can select
audio streams and sources, and control volume from the Home app or from the controls on the
Panorama 3 itself.
The Home app also provides options for optimising the Panorama 3 frequency response to its
environment, control of additional Bowers & Wilkins Formation products in your home, and
provides extensive interactive content designed to support, enhance and extend your Bowers &
Wilkins Formation experience.