PX7 Manual
1. Carton Contents Please ensure the following items are included in carton: PX7 Headphones USB-C Charging Cable 3.
2.
2.1 Switch Headphones On/Off Switching On Slide the Power Switch up to the middle position. An audible cue will be presented & the headphone indicator will light in a color (green, amber, red) displaying the current charge level. Switching Off Slide the Power Switch to the bottom position. An audible cue will be presented & the headphones power down when the indictor is no longer lit. 2.
The following buttons on the right ear piece to control phone call functionality: Function Action Answer or end call Press the Multi-function button once Answer an incoming call When incoming call occurs, press the Multi-function button once Decline an incoming When incoming call occurs, hold the Multi-function for 2 seconds Switch between two calls With two calls active, press the Multi-function button twice Merge two calls With two calls active, hold the Multi-function button for 1 second Togg
2.4 Ambient Listening PX7 headphones also features our second generation ambient listening technology. When enabled, this feature lets external sounds such as conversations or safety announcements to be heard without requiring the user to remove the headphone or disturb the wear. The Noise Cancellation button on the left ear piece also controls this feature.
3. Battery Charging Your Bowers & Wilkins headphones ships with the battery partially charged & may be used immediately. For best practice we recommend to fully charge the headphones before first use. Please allow up to 3 hours for full charge. The headphones can be used while charging. To charge: 1. Please use the supplied USB charging cable and connect the USB plug to a USB wall charger or a powered computer USB socket. 2.
3.1 Status Indicator The status indicator is located on the right ear piece next to the USB-C socket.
4. Wearing Your Headphones Wearing your headphones correctly will help ensure the best possible experience. 1. Identify the left and right ear pieces by finding the identification legends located on either side of headband. 2. Place the headphones on your head with the headband adjusted so that the headband & earpieces sit comfortably. Note: Wearing glasses that distort the profile of your ears may interfere with headphone performance.
5. Bluetooth Connectivity 5.1 Pairing Your Bowers & Wilkins PX 7 headphones are designed to stream music wirelessly from Bluetooth audio devices, such as smartphones, tablets, or computers. To do so, the headphones & device must first be paired. 1. The first time you switch on your headphones, Bluetooth pairing mode will be enabled, the indicator will blink blue. 2.
Note: Your headphones will automatically exit Bluetooth pairing mode if no device is paired within 5 minutes. If pairing fails, the indicator will rapid flash blue, please try pairing again 5.
Your headphones can connect up to two devices at the same time. However, you can only play audio or take calls from one device at a time. To switch between two devices: 1. Pause audio on the first device, or use the headphone’s play/pause button. 2. Play audio from the second device and the headphone will switch over. When streaming audio, receiving a call on the second device will automatically pause playback and the call will be routed automatically to your headphones.
6. Wired Connectivity In addition to Bluetooth, your Bowers & Wilkins headphones can also connect to audio sources using the supplied 3.5mm audio or USB cables. 6.1 Connecting with the 3.5mm audio cable The 3.5mm audio cable enables your headphones to be used with a device supporting analog sound output such as a smartphone or tablet 3.5mm headphone socket, a traditional hi-fi system, or on board an aircraft. 1. Insert the 3.5mm audio cable into the headphone 3.5mm socket on the left ear piece. 2.
7. Headphone Reset Your headphones can be reset to factory settings. When powered on, simultaneously hold down the Volume + and Noise Cancellation Button for 10 seconds until the indicator light turns off, let go when the indicator lights up again.
8. Caring For Your Headphones Your headphones can be cleaned by a damp cloth and gently dabbing until clean. Do not rub the cloth on the fabric or leather. Do not use cleaning detergents or leather polish, doing so may damage your headphones.
9. Specifications Technical Features Bluetooth Codec Bluetooth Profiles Drive Units Frequency Range Input Impedance Distortion (THD) Max output power Ratings Battery Life Charging Charging temperature: Operating temperature: Inputs Boxed Accessories Weight 16 Adaptive Noise Cancellation Intelligent Auto Noise Cancellation Voice Pass-Through Smart Wear Sensor Bluetooth 5.0 with AptX-Adaptive technology USB-C charging & audio interface 3.
