User's Manual

3
ENGLISH
1. T7 Carton Contents
• T7 speaker.
• T7 power supply.
• Regional plugs adapters.
• Document pack containing a Quick Start Guide,
warranty information and statutory safety warnings.
Environmental Information
This product complies with international directives,
including but not limited to the Restriction of
Hazardous Substances (RoHS) in electrical and
electronic equipment, the Registration, Evaluation,
Authorisation and restriction of Chemicals (REACH)
and the disposal of Waste Electrical and Electronic
Equipment (WEEE). Consult your local waste
disposal authority for guidance on how properly to
recycle or dispose of this product.
2. Getting to know the T7
Your T7 is designed for high performance,
portable and convenient music. Once switched
on via the Standby button on its right hand side,
it is controlled via Bluetooth, Play/Pause,
Volume + and Volume – buttons on it’s top panel.
A blue indicator adjacent to the Bluetooth button
displays Bluetooth connection state and a column
of white indicators above the Standby button
displays battery charge level and a variety of other
information. T7 also provides audible feedback for
some control commands and events.
Note: T7 is not waterproof and is not intended
for use in high humidity environments such as
bathrooms, swimming pools and saunas.
Connection sockets on the back of the T7 comprise
a power supply input, a 3.5mm jack analogue audio
input, and a micro-USB socket used for rmware
updates. A pin-hole reset button is also located on
the back of the T7.
Note: The T7 USB socket is present for rmware
updates and service use only. It cannot be used
for any other purpose.
Diagram 1 illustrates T7, its buttons and connection
sockets.
Diagram 1
Buttons and connection sockets.
Bluetooth pairing Play/Pause Volume down Volume up
POWER AUX USB RESET
On / Off / Check Battery Auxilary Service only ResetPower