Installation Manual

ManualsBrandsB&W Trailer Hitches ManualsOtherB&W Trailer Hitches TEXA4200 Gooseneck Extender

B&W Trailer Hitches

1216 Hawaii Rd / PO Box 186

Humboldt, KS 66748

P:620.473.3664

F:620.473.3766

Gooseneck Coupler Installation Instructions

Call or Email us for

Installation Support

hitches@turnoverball.com

www.turnoverball.com

Do not exceed tow or tongue rating of coupler, tow or

tongue rating of hitch, or tow or weight ratings of truck

or trailer. See vehicle and trailer manufacturer

information for ratings. Exceeding these ratings may

cause damage to towing components or loss of

attachment between the trailer and truck.

Do not modify this product in any manner. Doing so

could alter its integrity and lead to a loss of attachment

between the trailer and the tow vehicle.

Failure to comply with the safety information in these

instructions could result in serious injury or death.

Read all installation and operating instructions along

with all labels before using this product.

Without proper knowledge, towing can be a

dangerous activity. Understand all the risks involved

with towing before proceeding. For information on

towing safety, see

"The Trailer Handbook: A guide

to Understanding Trailer and Towing Safety"

from

the National Association of Trailer Manufacturers,

www.NATM.com.

WARNING

MODEL TEXA4200

See Limited Lifetime Warranty at

turnoverball.com/warranty

Extend−A−Goose™

COUPLER TUBE

COUPLER BOTTOM PLATE

HANDLE GUIDE

HOLES FOR THROUGH PIN

WARNING LABEL

Summary of content (4 pages)

PAGE 1
B&W Trailer Hitches 1216 Hawaii Rd / PO Box 186 Humboldt, KS 66748 P:620.473.3664 F:620.473.3766 Call or Email us for Installation Support hitches@turnoverball.com www.turnoverball.com Gooseneck Coupler Installation Instructions MODEL TEXA4200 See Limited Lifetime Warranty at turnoverball.
PAGE 2
INSTALLING THE COUPLER The installation of the Extend−A−Goose coupler requires two people. One person will need to hold the coupler in place while the other secures it to the trailer. Failure to support the coupler properly during installation may result in minor injury, or may cause damage to the coupler. 1. Measure your trailer hitch ball and the inside diameter of the sleeve on the trailer tongue to determine whether or not the Extend−A−Goose coupler is compatible with your hitch and trailer.
PAGE 3
COUPLING TO A TRAILER Keep at least 6" around the coupler free from obstructions and loose objects during towing. Failure to do so could result in a loss of attachment between the truck and the trailer, serious injury or death. Always use safety chains. Failure to use safety chains could result in serious injury or death. Inspect all towing components before towing, including hitch, coupler, trailer, and safety chain system for structural damage.
PAGE 4
UNCOUPLING FROM A TRAILER 1. Unlock the coupler. If necessary remove any padlocks that may be attached to the coupler handle. 2. Set the coupler to the "open" position. To do this, (1) grip the handle and pull straight up about 1", (2) rotate the handle clockwise until it stops, then release. (3) Rotate the coupler bottom plate counter−clockwise until it stops. See figure B1. Attempting to uncouple with the coupler in the closed position will prevent the coupler from releasing the ball.